Isobutene is an important commercial chemical used for the synthesis of butyl rubber, terephthalic acid, specialty chemicals, and a gasoline performance additive known as alkylate. Currently, isobutene is produced from petroleum and hence is nonrenewable. Here, we report that the Saccharomyces cerevisiae mevalonate diphosphate decarboxylase (ScMDD) can convert 3-hydroxy-3-methylbutyrate (3-HMB)...

The cell-free isobutene-forming system of Rhodotorula minuta IFO 1102 was prepared. This system consisted of isovaleric acid, NADPH, and a cell extract. The maximal activity obtained by using the described cell-free system was 17 nl/mg of protein per h. It appears that this cell-free isobutene-forming system operates in living cells of R. minuta.

Dimerisation of isobutene produces diisobutenes that can be hydrogenated to isooctane (2,2,4-trimethyl pentane). Isooctane can be used as a high octane gasoline component. The aim of this work was to study the selective production of diisobutenes through the dimerisation of isobutene on ion-exchange resin catalysts and to construct kinetic models for the reactions in the system for reactor desi...

Mevalonate diphosphate decarboxylase (MVD) is an ATP-dependent enzyme that catalyzes the phosphorylation/decarboxylation of (R)-mevalonate-5-diphosphate to isopentenyl pyrophosphate in the mevalonate (MVA) pathway. MVD is a key enzyme in engineered metabolic pathways for bioproduction of isobutene, since it catalyzes the conversion of 3-hydroxyisovalerate (3-HIV) to isobutene, an important plat...

Single-well, push-pull tests were conducted in a contaminated aquifer to evaluate the ability of toluene-oxidizing microorganisms to cometabolize chlorinated aliphatic hydrocarbons (CAHs), such as trichloroethene (TCE). Test solutions were injected into the aquifer using a standard monitoring well, and then were transported under natural-gradient conditions. Transport tests demonstrated similar...

A series of vanadia catalysts supported on SBA-15 (V/SBA) with a vanadia (V) content ranging from 1% to 11% were prepared by an incipient wetness method. Their catalytic behavior in the dehydrogenation of isobutane to isobutene with CO2 was examined. The catalysts were characterized by N2 adsorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and temperatur...

Manufacturing process and performance analysis of a non-frost refrigeration system are presented in this paper. Main objectives research were to suggest better refrigerant as well propose technique for further reduction the power consumption system. Performance was evaluated Tetra-fluoro-ethane Isobutene refrigerant. From experiment, it is found that, coefficient with than Tetra-fluoro-ethane. ...

The skeletal isomerisation of n-butenes to isobutene has been carried out over ferrierite catalysts (Si/Al ~ 15) containing different acid sites distribution and different amount of defects. The zeolite crystals were synthesised under hydrothermal conditions in fluoride medium in the absence of alkaline cations by using suitable combinations of structure directing agents. Template-driven low de...

The determination of trace water in gas samples, such as isobutene, chloromethane (polymeric staple gases) and SF6 by a conventional Karl Fischer coulometer is very difficult, because of the adsorption of trace water on the surface of sample pipe, the gasification of the liquefied samples, and the migration of moisture into the measuring cell from the surroundings. To solve these problems, we i...

A series of transport, biostimulation, and activity push-pull tests were performed under induced and natural gradient conditions in a trichloroethene (TCE) and cis-dichloroethene (c-DCE) contaminated aquifer. Transport tests demonstrated the feasibility of injecting and recovering complex solute mixtures from the aquifer. During the biostimulation tests, decreases in toluene concentration and t...