Determination of the local interlaminar stress distribution in a laminate with a bolt-filled hole is helpful for optimal bolted joint design, due to the three-dimensional (3D) nature of the stress field near the bolt hole. A new interlaminar stress distribution phenomenon induced by the bolt-head and clamp-up load, which occurs in a filled-hole composite laminate, is investigated. In order to e...

this paper presents a novel formulation and numerical solutions for adhesively bonded composite joints with non-linear (softening) adhesive behaviour. the presented approach has the capability of choosing arbitrary loadings and boundary conditions. in this model adherends are orthotropic laminates that obey classical lamination theory. the stacking sequences can be either symmetric or asymmetri...

A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. The presented approach has the capability of choosing arbitrary loadings and boundary conditions. In this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. Stacking sequences can be...

in the traditional hole drilling method the in-plane stresses are studied in detail and the interlaminar stresses are not taken seriously. the interlaminar stresses on the free edge of composite materials are important and can cause matrix cracking and delamination. inserting holes in composite laminates causes free edges and it can induce interlaminar shear and normal stresses. in this researc...

In this study, shear and peel stress distributions in the viscoelastic adhesive layer of a single-lap joint (SLJ) with functionally graded (FG) adherends are investigated. The study focuses on the effect of different adherend profiles and material composition on the time-dependent stress concentration/distribution in balanced and unbalanced SLJs. For this purpose, the Reddy model is applied to ...

A prestressing procedure for reduction of adhesive peel and shear stresses at the leading edge of a skin–flange assembly is analyzed for tensile and bending loads applied to the skin. Both an analytical solution based on the Green’s functions and a finite element solution are presented for specific examples, together with design diagrams. Substantial shear and peel stress reductions are obtaine...

Interlaminar shear strength (ILSS) of fiber reinforced polymer composite is an important property for most of the structural applications. Matrix modification is an effective method used to improve the interlaminar shear strength of composite. In this paper, EPON 862/w epoxy system was modified using Tetraethyl orthosilicate (TEOS) electrospun nanofibers (ENFs) which were produced using electro...

Based on generalized laminate plate theory, the formulation of a one-dimensional beam finite element with layer-wise constant shear (BLCS) is presented. The linear layer-wise representation of in-plane displacements permit accurate computation of normal stresses and transverse shear stresses on each layer for laminated beams with dissimilar ply stiffnesses. The BLCS formulation is equivalent to...

Photoacoustic spectroscopy was used to predict the interlaminar shear strength of a carbon/epoxy composite. Samples were artificially aged by exposing the samples to elevated temperatures in an air environment. Short-beam shear tests were performed to determine mechanically the interlaminar shear strength of the samples. Photoacoustic spectra of the samples were also collected and compared to m...