gas turbines play an important role in supplying power for the country especially in peak electricity load. the main disadvantages are the turbines, they produce large changes are a result of climate change. however, in times of peak electricity grid and at the same time warm months, can produce gas turbines under the effect of ambient temperature, the amount of reduced considerably. the method...

Air pre-cooling equipment is normally being employed in air-conditioning systems for pre-cooling the ambient outdoor air to enhance the air-conditioning systems performance. In this study, the potential of a passive water-to-air heat pipe based heat exchanger (HPHEX) for air pre-cooling purpose in air-conditioning systems for the high cooling load demanding regions of Iran was investigated. To ...

different control strategies of bed temperature and moisture were investigated using various inlet air temperatures and air fluxes in both the ordinary packed bed bioreactor (without cooling water in the jacket) and the bioreactor with cooling water in jacket. the experiments were carried out within a 1-l solid-state packed bed bioreactor in which aspergillus niger was cultivated on wheat bran....

Different control strategies of bed temperature and moisture were investigated using various inlet air temperatures and air fluxes in both the ordinary packed bed bioreactor (without cooling water in the jacket) and the bioreactor with cooling water in jacket. The experiments were carried out within a 1-L solid-state packed bed bioreactor in which Aspergillus niger was cultivated on wheat bran....

Gas turbines play an important role in supplying power for the country especially in peak electricity load. The main disadvantages are the turbines, they produce large changes are a result of climate change. However, in times of peak electricity grid and at the same time warm months, can produce gas turbines under the effect of ambient temperature, the amount of reduced considerably. The method...

Gas turbines incur a loss of output power during hot seasons due to high ambient air temperatures, and input air cooling systems are often used to partly offset this problem. Here, results are reported for an investigation of the utilization of a heat pump to cool the inlet air of a gas turbine compressor. The analyses are carried out for two climates: the city of Yazd, Iran, which has a hot, a...

A shower cooling tower (SCT) operates without fill because of salt decomposition on the fill that leads to deterioration of conventional cooling tower performance. This study presents a two-dimensional mathematical model for energy and exergy analysis of multi-diameter droplets and air interaction along with the height of the forced draft SCT, to predict the exit condition of water droplet for ...

Performance of a gas turbine mainly depends on the inlet air temperature. The power output of a gas turbine depends on the flow of mass through it. This is precisely the reason why on hot days, when air is less dense, power output falls. The objective here is to assess the advanced systems applied in reducing the gas turbine intake air temperature and examine the merits from integration of the ...

temperature restrictions on aqueous effluents dictate that streams with a temperature higher than the permitted level needed to pass through cooling systems to reduce the effluent temperature before discharge. in this study, by considering the grouping design rules based on pinch technology, an optimum design for a distributed effluent cooling system, has been developed. a counter-flow wet cool...

The paper presents the analysis of the energy performance of an air vortex cooling tube under variations of the air inlet properties, with three independent experimental tests validated through the energy balance in the device. The experimental analysis includes the following variations of the input conditions: First, the effect of the air inlet pressure to the vortex tube, focused on the analy...