This study carried out comparative seismic performance of reinforced concrete frames infilled by masonry walls with different heights. Partial and fully infilled reinforced concrete frames were modeled for the research objectives and the analysis model for a bare reinforced concrete frame was also established for comparison. Non–linear static analyses for the studied frames were performed to in...

Infilled walls are the major non-structural elements which have significant effects on the seismic behavior of structures. The shape and strength of the brick elements are the main parameters affect the strength of the walls. In addition existence of openings may have a reduction effect. To increase the strength of the wall and to improve its behavior, the borders of the openings may be strengt...

The paper presents a plastic analysis procedure based on the energy balance concept for performance based seismic retrofit of multi-story multi-bay masonry infilled reinforced concrete (R/C) frames with a ‘soft’ ground story using passive energy dissipation (PED) devices with the objective of achieving a target performance level of the retrofitted R/C frame for a given seismic hazard level at t...

Performance based design (PBD) is an iterative exercise in which a preliminary trial design of the building structure is selected and if the selected trial design of the building structure does not conform to the desired performance objective, the trial design is revised. In this context, development of a fundamental approach for performance based seismic design of masonry infilled frames with ...

Infilled frame structures are commonly used in buildings. Masonry infilled RC frames are the most common type of structures used for multi-storeyed constructions in the developing countries, even in those which are located in seismically active regions also. Masonry infill walls are mainly used to increase initial stiffness and strength of reinforced concrete (RC) frame buildings. In the presen...

Abstract: Masonry infill is considered as a non-structural element in all type of buildings where masonry use. But, masonry infill walls are mainly used to increase initial stiffness and strength of reinforced concrete (RC) frame buildings. This Open First storey is also termed as “Soft Storey”. The upper storeys have brick infilled wall panels with various opening percentage in it. In many cit...

a new type of infilled frame has been recently proposed. it has a frictional sliding fuse, horizontally installed at the mid-height of the infill. it has already shown that such infilled frames have higher ductility, strength and damping ratio as well as more enhanced hysteresis cycles, compared with regular infilled frames. this experimental paper is focused on the influence of gravitational l...

This work concerns an assessment of the behavior of infilled frames. The feasibility of possible immediate implementation of some recent developments both in analysis and design of infilled frames for practical design is investigated. It is now widely recognized that masonry infill panels used in reinforced concrete (R/C) frame structures, significantly enhance both the stiffness and the streng...