asphalt modification/reinforcement has received considerable attention as viable solutions to enhance flexible pavement performance. this is mainly prompted by the unsatisfactory performance of traditional road materials exposed to dramatic increases and changes in traffic patterns. this paper presents the evaluation of fatigue behaviour of nano reinforced stone mastic asphalt mixtures. fatigue...

Fatigue cracking is an essential problem of asphalt concrete that contributes to pavement damage. Although stone matrix asphalt (SMA) has significantly provided resistance to rutting failure, its resistance to fatigue failure is yet to be fully addressed. The aim of this study is to evaluate the effect of crumb rubber modifier (CRM) on stiffness and fatigue properties of SMA mixtures at optimum...

Cross-linked polyethylene (XLPE) is an appropriate insulating material for high-voltage cables which has been widely used as electrical cable coating. In this study, Crushed XLPE wastes with different volume percentages (25, 50, and 75%) were used in hot mix asphalt (HMA) as a substitute for fine aggregates remained on sieve no. 8 whose size varies from 1.18 to 2.36 mm. The dynamic stiffness (i...

Semi-Circular Bending (SCB) Test is a fast and accurate three-point bending test, which was originally used in rock mechanics. SCB test is going to be an accepted test method for asphalt concrete pavements. Different asphalt-mixture property-values such as tensile strength, stress intensity factor and fatigue can be obtained by this test. In this study, static and dynamic tests including SCB te...

Asphalt modification/reinforcement has received considerable attention as viable solutions to enhance flexible pavement performance. This is mainly prompted by the unsatisfactory performance of traditional road materials exposed to dramatic increases and changes in traffic patterns. This paper presents the evaluation of fatigue behaviour of nano reinforced Stone Mastic Asphalt mixtures. Fatigue...

To solve the problem of rutting and fatigue damage to asphalt pavement, rutting and fatigue performances of Qingchuan rock asphalt modified asphalt were studied, based on the dynamic shear rheometer test, the dynamic creep test, the rutting test, the indirect tensile fatigue test, the small-sized acceleration loading test, the compressive resilient modulus test, the BISAR3.0 Program and the rut...

Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...

Cold-in-place recycling (CIR) is an environmentally sustainable alternative for preservation of asphalt pavements. A major disadvantage of this practice is the lower strength of the cold-in-place mixtures. Addition of cement into this type of mixture is a method for increasing its bearing capacity. The effect of cement content on the mechanical properties of the cold-in-place recycled asphalt m...

Using Reclaimed Asphalt Pavement (RAP) in asphalt mixes has become a common practice in many countries as experience indicated that the recycling of asphalt pavements is very advantageous from different perspectives. Some of the advantages of utilizing RAP include conservation of asphalt and aggregate resources, conservation of energy, and reduction in life-cycle cost. In this study, the suitab...