نتایج جستجو برای: In situ composite
تعداد نتایج: 17016136 فیلتر نتایج به سال:
copper matrix composite reinforced by 1wt.% tib2 particles was prepared using in situ reaction of cu-1.4wt.% ti and cu-0.7wt.% b by rapid solidification and subsequent heat treatment for 1-20 hrs at 900ºc. high-resolution transmission electron microscopy (hrtem) characterization showed that primary tib2 particles were formed in liquid copper. heat treatment of as-solidified samples led to the f...
thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...
there are described nanocomposites based on ultra high molecular weight polyethylene and graphite nanoplates prepared by in-situ polymerization method. it is carried out a comprehensive study of electric properties of these composites, including direct current (dc) and alternating current (ac) properties. there is explored dependence of the conductivity and dielectric permeability on filler con...
In situ Al2024- Mg2Si composite was fabricated by spark plasma sintering (SPS) of reactive powder. Reactive powder was obtained from mechanical alloying (MA) of elemental powders. Clad layers of in situ composite were fabricated on Al substrates by spark plasma sintering (SPS). Structural evolution during MA process and after SPS was investigated by X-ray diffractometery (XRD). Scanning electro...
این پژوهش به منظور بررسی تغییرات ترکیبات شیمیایی و ارزش غذایی سیلوی علوفه نی با افزودن برگ توت، آردجو و آنزیم به روش in vitro و in situ انجام شد. بدین منظور علوفه نی جمع آوری و جهت سیلو نمودن به قطعات 4-2 سانتی متری خرد گردید. سپس با استفاده از برگ توت ( 40 درصد)، آرد جو (10 درصد) و آنزیم به مقدار توصیه شده ( 3 گرم به ازای هر کیلوگرم ماده خشک) قبل از سیلو مخلوط و درون سطل های 5 کیلویی پلاستیکی ...
Recently, a series of three-component compounds with the combination of Mn+1AXn known as Max phases have been considered as a new material. One of the most important features of Max phases, is the self-healing property of them. The main reason for considering Max Phases is a unique collection of unusual properties including their metallic, ceramic, physical, and mechanical properties. One of th...
The new in situ method for AI-TiC composite fabrication has been carried out. In this method, fabrication of AI-TiC composite by simultaneous introduction of titanium oxide and carbon into aluminum melt was investigated.. Under the process conditions, titanium and carbon reaction results in titanium carbide whiskers. The salt containing keriolite (Na3AIF6), titanium oxide (TiO2) and graphite us...
این پژوهش به منظور بررسی تغییرات ترکیب شیمیایی و ارزش غذایی سیلوی سورگوم با افزودن مولتی آنزیم و مخمر به روش in vitro و in situ انجام شد. بدین منظور علوفه سورگوم در مرحله شیری بودن دانه ها در خرداد ماه برداشت و جهت سیلو نمودن به قطعات 4 - 2 سانتی متری خرد گردید. سپس با استفاده از مولتی آنزیم در سه سطح(صفر،3 و 6 گرم در کیلوگرم ماده خشک) و مخمر ساکارومایسیس سرویسیه در سه سطح(صفر، 5/2 و 5گرم در کی...
asymmetric polyethersulfone (pes) microfiltration flat sheet membranes were composed by the phase inversion method (pim) and were used as supports. composite membranes were fabricated by coating silicone rubber as selective layer. effect of different concentrations of pes and pdms and different solvent such as nmp, dmf and dms effects as pes solvents and support thickness and different coagulat...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید