Contents 1. Introduction 2. Stress-induced lubricant degradation 3. Basic equations governing the fluid elastohydrodynamic lubrication (EHL) of line and point contacts 3.1. Equations of fluid motion 3.2. Contact surface displacements in line and point lubricated contacts 4. Steady isothermal EHL problems for lightly loaded non-conformal line contacts 5. Steady isothermal EHL problems for heavil...

Interacting surfaces are frequently found in mechanical systems and components. A lubricant is often added between the surfaces to separate them from mechanical contact in order to increase life and performance of the contacting surfaces. In this work various aspects of hydrodynamic lubrication are investigated theoretically. This is where interacting surfaces are completely separated by a flui...

The contribution deals with a self-consistent description of time-mean turbulent lubricant flow, i.e. flow through a wedgeshaped gap confined by counter-sliding solid surfaces. The methods adopted are matched asymptotic expansions, where the slenderness or aspect ratio of the gap and the accordingly defined Reynolds number represent the perturbation parameters. As a remarkable finding, a load-b...

in order to reduce wear in gudgeon pin, bush and piston boss lubrication is done. oil used in national engine species was 10w40 with dynamic viscosity 5.5 mpa.s at 140 °c (the working temperature). in order to complete investigation the oil film hydrodynamics analysis in small end of connecting rod, a real full model engine with four cylinders has been simulated by avl excite5.1 software. in th...

In the present study, a modified Reynolds equation including the electrical double layer (EDL)-induced electroviscous effect of lubricant is established to investigate the effect of the EDL on the hydrodynamic lubrication of a 1D slider bearing. The theoretical model is based on the nonlinear Poisson-Boltzmann equation without the use of the Debye-Hückel approximation. Furthermore, the variatio...

The transition from boundary lubrication to fully hydrodynamic lubrication is investigated for air-lubricated slider bearings using the electrical resistance method. Intermittent contacts are shown to exist even under conditions for which the numerical solution of the Reynolds equation or white light interferometry predicts steady state spacings in the spacing region from 0.125 to 0.25 pm. The ...

Theoretical Analysis on the profile of slider in reciprocating compressor has been presented based on the hydrodynamic lubrication. Theoretical Analysis calculates fluid film pressure, attitude angle, frictional force, and minimum film thickness in normal condition for comparing two different profiles of slider. The calculated results show that the profile of slider plays an important role in t...

This work gives an overview of the theoretical and experimental achievements of mechatronics applied to fluid film bearings. Compressible and uncompressible fluids are addressed. Rigid and elastic (deformable) bearing profiles are investigated. Hydraulic, pneumatic, magnetic and piezoelectric actuators are used. The ideas of combining control techniques, informatics with hydrodynamic, thermo-hy...