sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. but square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

the present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of al2o3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.laminar fully developed flow heat transfer coefficient of al2o3 nanoparticles are dispersed in water in circular tube is discussed in this paper. in order to valid...

Shell and Tube heat exchangers are the heat exchangers that are most widely used in industries and for other commercial purposes. There are many techniques that have been utilized to enhance the heat transfer performance of the shell and tube heat exchangers. Air bubble injection is one of the promising and inexpensive techniques that can create turbulence in the fluids resulting in to enhancem...

in this paper, the effects of adding nanoparticles including tio2 to a fluid media for purpose of free convection heat transfer improvement were analyzed. the free convection was assumed to be in laminar flow regime and the solutions and calculations were all done by the integral method. water, as a newtonian fluid, was considered the base fluid (water) and all the thermo physical properties of...

a nanofluid is a dilute liquid suspension of particles with at least one critical dimension smaller than ~100 nm. research works so far suggest that nanofluids offer excellent heat transfer enhancement over conventional base fluids. the enhancement depends on several factors such as particle shape, particle size distribution, volume fraction of nanoparticles, temperature, ph, and thermal conduc...

using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. in this work two-dimensional incompressible laminar flow of a nanofluid e...

the thermo-hydraulic behavior of the air flow over a two dimensional ribbed channel wasnumerically investigated in various rib-width ratio configurations (b/h=0.5-1.75) atdifferent reynolds numbers, ranging from 6000 to 18000. the capability of differentturbulence models, including standard k-ε, rng k-ε, standard k-ω, and sst k-ω, inpredicting the heat transfer rate was compared with the experi...

Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

in order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. silver-oil nanofluid prepared by electrical explosion of wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. the average size...