نتایج جستجو برای: Heat Source Model
تعداد نتایج: 2605161 فیلتر نتایج به سال:
run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...
in this paper, a three-dimensional finite element model has been developed to simulate the laser-tig hybrid welding (hlaw) of stainless steel 1.4418 with thickness of 4 mm. transient temperature profile and dimensions of the fusion zone and heat affected zone (haz) during welding process are calculatedusing finite element method (fem) and were solved in the abaqus/standard software.the heat sou...
In this paper, the non-Fourier heat conduction in a semi-infinite body was examined. The heat wave non-Fourier heat conduction model was used for thermal analysis. Thermal conductivity was assumed temperature-dependent which resulted in a non-linear equation. The heat source was also considered temperature-dependent which resulted in a non-homogeneous equation. The Mac-Cormack predictor-correct...
all the producing and assembling processes exert residual stress on the pieces that may lead to structural failure. therefore, calculating the residual stress in such structures has been common in recent years. in this article, distribution of temperature and residual stress resulting from arc welding in three-pass butt joint in p91 austenitic stainless steel pipes is calculated and estimated u...
In this work, analysis of transient three-dimensional heat transfer in a slab with internal heat generation and heated by a point moving heat source along its axis is carried out using integral transforms methods. The heat input into slab or workpiece by the moving heat source is considered in the model. From the results, it was established that the temperature of the material during the heat t...
any change in the refractive index of a laser active medium can lead to serious degradation of beam quality, laser beam modes, laser performance and variation in the intensity distribution. alteration in the refractive index of laser active medium is especially notable in high power lasers. it is clear that in the laser beam production, the pumping agent induces a great amount of heat which...
a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...
In this paper, a three-dimensional finite element model has been developed to simulate the laser-TIG hybrid welding (HLAW) of stainless steel 1.4418 with thickness of 4 mm. Transient temperature profile and dimensions of the fusion zone and heat affected zone (HAZ) during welding process are calculatedusing finite element method (FEM) and were solved in the ABAQUS/Standard software.The heat sou...
In this paper, a three-dimensional finite element model has been developed to simulate the laser-TIG hybrid welding (HLAW) of stainless steel 1.4418 with thickness of 4 mm. Transient temperature profile and dimensions of the fusion zone and heat affected zone (HAZ) during welding process are calculatedusing finite element method (FEM) and were solved in the ABAQUS/Standard software.The heat sou...
The modelling of the thermal process is used as a tool in determination properties materials, subject to welding. One most important steps calibration heat source model. This necessary condition for given model be solve practical problems. standard practice this regard calibrate by shape melted zone or temperature cycles at set points. In present work, based on maximum temperatures measured sev...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید