An improved model for nuclear fuel corrosion inside a failed waste container has been developed. The model considers the influence of the a-radiolysis products using a full radiolytic reaction set, and demonstrates that H2O2 is the dominant oxidant. Corrosion of the fuel is modelled considering both the direct oxidation of UO2 by H2O2 and the galvanically-coupled oxidation by H2O2 reduction on ...

This paper discusses chemical and galvanic corrosion of tungsten nitride carbide (WNC) barrier metal. Chemical corrosion occurs due to the oxidation of W in the WNC film by H2O2, which is used as oxidizer in CMP slurries, followed by the dissolution of the oxide complex. Galvanic corrosion takes place due to the high potential difference between Cu and WNC established in the presence of H2O2 ba...

A two-dimensional model has been developed to simulate the corrosion of nuclear fuel pellets under permanent waste disposal conditions in a steel vessel with a corrosion-resistant copper shell. The primary emphasis was on the corrosion behavior within cracks with various dimensions. It was shown that a simplified α-radiolysis model which only accounts for the radiolytic production of H2O2 and H...

A model was developed to determine the influence of steel corrosion products on a-radiolytic corrosion of spent nuclear fuel inside a failed waste container. The model takes into account the a-radiolysis of water, the reaction of radiolytic H2O2 with UO2 both directly and via galvanic coupling with noble metal particles, the reaction with H2 via galvanic coupling, and the Fenton reaction. The d...

A 2-D model for the corrosion of spent nuclear fuel inside a failed nuclear waste container has been modified to determine the influence of various redox processes occurring within fractures in the fuel. The corrosion process is driven by reaction of the fuel with the dominant α radiolysis product, H2O2. A number of reactions are shown to moderate or suppress the corrosion rate, including H2O2 ...

Magnesium (Mg) and its alloys, including Mg-9%Al-1%Zn (AZ91), are biodegradable metals with potential use as temporary orthopedic implants. Invasive orthopedic procedures can provoke an inflammatory response that produces hydrogen peroxide (H2O2) and an acidic environment near the implant. This study assessed the influence of inflammation on both the corrosion and mechanical properties of AZ91....

At the past, damaged tissue was removed from the body of patients. But now tissue regeneration using scaffolds and implants are used to repair the damaged tissue and organs. Besides of the mechanical properties of metallic biomaterials, they suffer from bioinertness. Using some surface treatment techniques, the bioactivity and also corrosion resistance of titanium implants could be improved. In...

A novel label-free colorimetric strategy was reported for sensitive detection of copper ions (Cu(2+)) by using the decelerating etching of gold nanorods (GNRs). H2O2 was employed as the oxidant for corrosion of GNRs, leading to the decrease of the aspect ratio of GNRs. In the absence of Cu(2+), the redox corrosion of GNRs by H2O2 occurred rapidly, causing the distinct color change of GNRs from ...

single crystal zno microrods are deposited on the surface of zn plate through corrosion of zn plate by h2o2, which is a green neutral reagent and easy to transform to h2o and o2. the structure and morphology of the obtained zno microrods were characterized by x-ray diffraction (xrd), scanning electron microscopy (sem), transmission electron microscopy (tem) and electron diffraction. a thermodyn...

Corrosion resistance of pure titanium (Grade 2) and Ti−Pd alloy (Grade 7) was studied using the electrochemical techniques of potentiodynamic measurements and electrochemical impedance spectroscopy (EIS). Measurements were performed at the temperature of 36.6 °C in two solutions: PBS solution with pH of 7.4 simulating conditions of healthy human body, and PBS solution with pH of 5.2 and with th...