the aim of this study is experimental assay of sensitivity and stability of a bimetallic silver/gold spr sensor chip. this chip utilizes the sensitivity of the silver and the stability of the gold. moreover, the silver layer (instead of usual cr or ti layer) was used as an adhesive intermediate layer between the gold layer and the glass substrate. the optimization of the gold/silver thickness u...

In this study, commercial-grade NiCr (80 wt % Ni, 20 wt % Cr) and NiCrSi (55 wt % Ni, 40 wt % Cr, 5 wt % Si) were used as targets and the sputtering method was used to deposit NiCr and NiCrSi thin films on Al₂O₃ and Si substrates at room temperature under different deposition time. X-ray diffraction patterns showed that the NiCr and NiCrSi thin films were amorphous phase, and the field-effect s...

Background: Approximately one quarter of all nosocomial infections can be attributed to the urinary tract. The infections are supposed to be mainly caused by implantations of urethral catheters and stents. A new catheter design is introduced with the aim to lower the high number of nosocomial urethral infections. In order to avoid limitations to use, the design is first applied to conventional ...

We present a method to deposit bulk-like Bi films by thermal evaporation and study the electrical, quantum coherence, and physical properties. A two stage growth procedure was found to optimize the film properties, with an initial wetting layer deposited at lower temperature followed by an active layer at higher temperature. Transport measurements indicate carrier properties comparable to molec...

Direct observations using scanning transmission electron microscopy unveil an intriguing interfacial bi-layer that enables epitaxial growth of a strain-free, monoclinic, bronze-phase VO2(B) thin film on a perovskite SrTiO3 (STO) substrate. We observe an ultrathin (2-3 unit cells) interlayer best described as highly strained VO2(B) nanodomains combined with an extra (Ti,V)O2 layer on the TiO2 te...

This letter demonstrates bi-layer channel Al-doped ZnO/ZnO thin film transistors (AZO/ZnO TFTs) via atomic layer deposition process at a relatively low temperature. The effects of annealing in oxygen atmosphere at different temperatures have also been investigated. The ALD bi-layer channel AZO/ZnO TFTs annealed in dry O2 at 300 °C exhibit a low leakage current of 2.5 × 10-13A, I on/I off ratio ...

BiFeO₃/BaTiO₃ bi-layer thick films (~1 μm) were deposited on Pt/Ti/SiO₂/(100) Si substrates with LaNiO₃ buffer layers at 500 °C via a rf magnetron sputtering process. X-ray diffraction (XRD) analysis revealed that both BiFeO₃ and BaTiO₃ layers have a (00l) preferred orientation. The films showed a small remnant polarization (Pr ~ 7.8 μC/cm²) and a large saturated polarization (Ps ~ 65 μC/cm²), ...

Ultrathin metamaterial layers are modeled by a homogeneous bi-anisotropic film to represent various kinds of broken symmetries in photonic nanostructures, and specifically in optical metamaterials and metasurfaces. Two algorithms were developed to obtain the electromagnetic (EM) wave response from a metasurface (direct solver) or the metasurface parameters from the EM wave response (inverse sol...

In this paper, indium (In) films were deposited on glass substrates using DC sputtering method. Multiwalled carbon nanotubes (MWCNTs) and dispersant were dissolved in alcohol, and the mixed solution was deposited on the In films using the spray method. The bi-layer MWCNTs-In2O3 films were annealed at different temperatures (from room temperature to 500°C) in O2 atmosphere. The influences of ann...