Gas-insulated substations (GIS) have different specifications in proportion to air-insulated substations. Transformer failures related to lightning and switching are often reported in the gas insulated substation (GIS). This problem is the voltage magnifications due to reflections of switching and lightning surges at various junctions within the GIS. thereby overvoltages in GIS are more importa...

In this paper, the trajectories of free conducting particles of various sizes inside a three phase common enclosure Gas Insulated Busduct(GIB) are simulated by solving the nonlinear second order differential equation of particle motion iteratively by using RK 4 Order Method. Compressed Gas Insulated Substations(GIS) consists of a conductor supported by spacers inside of Sulphur hexafluoride gas...

This study presents the manner in which transient modeling concepts, which are fully analyzed in the referred standards, are implemented, for the purpose of evaluating the Transient Ground Potential Rise (TGPR). This is a phenomenon of 10–100kV voltages with up to 10μs duration on the grounded enclosure of Gas Insulated Substations (GIS), which may cause concern for personnel safety and problem...

This study presents the manner in which transient modeling concepts, which are fully analyzed in the referred standards, are implemented, for the purpose of evaluating the Transient Ground Potential Rise (TGPR). This is a phenomenon of 10–100kV voltages with up to 10µs duration on the grounded enclosure of Gas Insulated Substations (GIS), which may cause concern for personnel safety and pro...

The reliability of gas insulated substations can be improved by eliminating the effects of metallic particles. The purpose of this paper is to develop techniques, which will formulate the basic equations that will govern the movement of particles like aluminum, copper in uncoated as well as coated Busduct.

Gas Insulated Switchgear (GIS) has been widely used in substations. The insulating medium used in GIS is sulfur hexafluoride (SF6) gas. However, the internal insulation defect existed in GIS would inevitably lead to partial discharge (PD), and cause the composition of SF6 to SOF2, SO2F2 and SO2 and other characteristic component gases. The decomposition phenomenon would greatly reduce the insul...

During switching of disconnectors (DS) in GIS a varying number of pre-strikes and re-strikes occur. Due to the very short duration of the voltage collapse, traveling surges are generated in the busbar duct. These very fast transient overvoltages (VFTO) can become the limiting dielectric stress which defines the dimensions at UHV voltage levels. The decision shall be based on the maximum VFTO pe...

The acoustic emission (AE) is a group of phenomena involving generation of transient elastic (acoustic or vibro-acoustic) waves, resulting from liberation of intermolecular bond energy (deformation, cracking, phase transitions). This fact contributed to elaboration of the acoustic emission method, which is widely used in: (i) diagnostics of cutting tools and machine cutting process, (ii) machin...

Introduction Sulfur hexafluoride (SF 6) gas is widely used in circuit breakers and gas-insulated substations, but its use presents safety and environmental challenges when maintenance is needed. Utilities using SF 6 gas have a variety of needs, including best practices for handling SF 6 , new tools for detecting and mitigating leaks, and information on assessing gas purity. In recent years, EPR...

In this context of changing and challenging market requirements, Gas Insulated Substation(GIS) has found a broad range of applications in power systems for more than two decades because of its high reliability, easy maintenance and small ground space requirement etc. SF6 has been of considerable technological interest as an insulation medium in GIS because of its superior insulating properties,...