the main objective of this paper is to examine the effect of nanomaterials on mass transfer coefficient in bubble type absorption of carbon dioxide by experiment. the absorption process is carried out in a bubble column and in room temperature. mass transfer coefficient, saturated concentration of co2, and gas holdup are determined in this system. the kinds of nanomaterials, the concentrations ...

the equilibrium solubility data of co2 in the various aqueous blends of triisopropanolamine (tipa) + monoethanolamine (mea) with the total alkanolamine concentration of 2 mole / dm3 were measured at the temperatures of 30, 40, 50, 60 and 70 oc and co2 partial pressures below 100 kpa. the experiments were done in an atmospheric gas absorption system and the amount of absorbed co2 was measured wi...

In this study, doped vanadium oxide nanotubes were evaluated using different software to study the absorption of hydrogen gas. Vanadium oxide nanotubes are one of the options for absorption and storage hydrogen gas. In this research study for the first time, the Monte Carlo simulation was used to investigate the hydrogen gas absorption behavior in molybdenum-tungsten, molybdenum-zirconium and z...

in this study, it was shown that how co2 and h2s were removed from a natural gas stream, using a nanofluid containing nanoporous graphene in diehanolamine (dea). before running the experiments, the appropriate values were chosen for the nanosheet dosage and the liquid and gas flow rates in the absorption experiments, which were performed in a laboratory scale wetted wall column. in the experime...

natural gas is often associated with nitrogen and heavy compounds. the heavy components in the natural gas not only can feed downstream units, owing to the low temperature process may be formed solid as well. therefore, heavy components separation can be a necessity and produce useful products. virtually, all natural gases are containing nitrogen ​​that would lower the heating value of natural ...

in natural gas treatment, the removal of co2 and h2s in acid gases is a critical concern. there are various purification technologies that can be used for the removal of acid gas impurities. absorption of acid gas into amines is one preferred method in gas industries. in the past, single amines was used, but recently in order to improve absorption performance, mixed amines with different solubi...

Carbon dioxide capture is a key issue in climate change mitigation. For decades the removal of carbon dioxide has been an essential step in many industrial processing operations such as the synthesis of ammonia, natural gas purification, and oil refining. In this study, a rotating packed bed has been designed for absorption of carbon dioxide from an air stream. The rotating packed bed is a comp...

in order to increase the rate of gas absorption, chemical reaction in the liquid phase is considered. the purpose of this paper was to simulate gas absorption process by a liquid film over a spherical packing incorporating eddy viscosity and diffusivity. second order chemical reaction for two different cases (fast and slow) were considered. the system partial differential equations obtained was...

Natural gas usually contains significant amounts of acid gases when it is extracted from underground reservoirs. Therefore, it must be treated by appropriate processes to remove these acidic components. In this study, the simultaneous absorption of carbon dioxide and hydrogen sulfide from natural gas into diethanol amine solution was simulated using CFD. Absorption process was performed in a we...

    In this study, it was shown that how CO2 and H2S were removed from a natural gas stream, using a nanofluid containing nanoporous graphene in Diehanolamine (DEA). Before running the experiments, the appropriate values were chosen for the nanosheet dosage and the liquid and gas flow rates in the absorption experiments, which were performed in a laboratory scale wetted wall column. In the expe...