in order to investigate the flexural behaviors of rc beams after freeze-thaw cycles, compressive strength test of concrete cubes after 0, 50, 100, 125 freeze-thaw cycles were made, and static flexural experiment of 48 rc beams after 0, 50, 100, 125 freeze-thaw cycles were made. the relationships of relative compressive strength, mass loss rate, relative dynamic elastic modulus and numbers of fr...

Waste tires, rubbers, plastic and steel materials, normally produced in every society, enter the environment and cause serious problems. These problems may, to some extent, be reduced by finding applications for them in engineering, for example, they can be used for geotechnical applications as backfill material and solving problems with low shear strength soils. Such materials may be subjected...

Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanica...

this study was conducted to evaluate the effects of freeze-thaw cycles on some quality parameters of silver carp fillets. the prepared fillets were packaged in zip lock bags and were subjected to 0, 1, 2, 3, 4 and 5 freeze-thaw cycles, respectively. heme iron content decreased, and dry matter increased as the number of freeze-thaw cycles increased (p

waste tires, rubbers, plastic and steel materials, normally produced in every society, enter the environment and cause serious problems. these problems may, to some extent, be reduced by finding applications for them in engineering, for example, they can be used for geotechnical applications as backfill material and solving problems with low shear strength soils. such materials may be subjected...

During normal sample preparation, storage in freezers and subsequent freeze/thaw cycles are commonly introduced. The effect of freeze/thaw cycles on the metabolic profiling of microalgal extracts using HR-MS was investigated. Methanolic extracts of monocultures of Arctic marine diatoms were analyzed immediately after extraction, after seven days of storage at -78 °C (one freeze/thaw cycle), and...

Concrete patch repair has long been used to repair the damaged concrete structures. In cold regions, freeze– thaw cycle is one of the major damage factors. Not only the material itself is damaged by freeze–thaw cycles, but also the adhesive interface, which is regarded as the weakest part of composite system, degrades under freeze–thaw cycles. Air entraining agent has long been used to increase...

The cold climate is a favorable parameter for the development of tension cracks and decrease of rock brittleness. Therefore, this paper attempts to investigate the Hamekasi porous limestone in order to predict the brittleness indices during freeze-thaw cycles. The freeze–thaw test was executed for one cycle including 16 h of freezing, and 8 h of thawing. The geo mechanical properties and brittl...

An experimental study of plain concrete specimens of water-cement ratio 0.55, subjected to 0, 15, 25, 40, 50 and 75 cycles of freeze-thaw was completed. The dynamic modulus of elasticity (DME), weight loss, compressive strength, tensile strength, flexural strength, cleavage strength and stress-strain relationships of plain concrete specimens suffering from freeze-thaw cycles were measured. The ...