in order to investigate the flexural behaviors of rc beams after freeze-thaw cycles, compressive strength test of concrete cubes after 0, 50, 100, 125 freeze-thaw cycles were made, and static flexural experiment of 48 rc beams after 0, 50, 100, 125 freeze-thaw cycles were made. the relationships of relative compressive strength, mass loss rate, relative dynamic elastic modulus and numbers of fr...

In order to study the application of lime-fly ash loess in permafrost subgrade engineering, uniaxial compressive test, fast direct shearing test and permeability tests were carried out on lime-fly ash loess under different curing ages and freeze-thaw cycles. Uniaxial compressive strength of lime-fly ash loess increases slowly with the curing ages, and can reach 3.5 Mpa after the curing ages of ...

Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanica...

The cold climate is a favorable parameter for the development of tension cracks and decrease of rock brittleness. Therefore, this paper attempts to investigate the Hamekasi porous limestone in order to predict the brittleness indices during freeze-thaw cycles. The freeze–thaw test was executed for one cycle including 16 h of freezing, and 8 h of thawing. The geo mechanical properties and brittl...

Waste tires, rubbers, plastic and steel materials, normally produced in every society, enter the environment and cause serious problems. These problems may, to some extent, be reduced by finding applications for them in engineering, for example, they can be used for geotechnical applications as backfill material and solving problems with low shear strength soils. Such materials may be subjected...

this study was conducted to evaluate the effects of freeze-thaw cycles on some quality parameters of silver carp fillets. the prepared fillets were packaged in zip lock bags and were subjected to 0, 1, 2, 3, 4 and 5 freeze-thaw cycles, respectively. heme iron content decreased, and dry matter increased as the number of freeze-thaw cycles increased (p

waste tires, rubbers, plastic and steel materials, normally produced in every society, enter the environment and cause serious problems. these problems may, to some extent, be reduced by finding applications for them in engineering, for example, they can be used for geotechnical applications as backfill material and solving problems with low shear strength soils. such materials may be subjected...

an experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (sfrc) under abrasion and cycles of freeze and them. compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. in total, over 200 specimens were tested the test variables included two concrete strength., (i. e., 28 mpa as normal strength ...

Concrete patch repair has long been used to repair the damaged concrete structures. In cold regions, freeze– thaw cycle is one of the major damage factors. Not only the material itself is damaged by freeze–thaw cycles, but also the adhesive interface, which is regarded as the weakest part of composite system, degrades under freeze–thaw cycles. Air entraining agent has long been used to increase...