This paper describes the fracture mechanics approach behind the water pressure ‘blow-off test for characterising the failure behaviour of composite repairs on steel tubes. The technique enables the fracture toughness of the metal/composite interface to be determined at the point where failure initiates. Surprisingly the values found for the interfacial fracture toughness are typically an order ...

In this investigation ‚the fracture toughness of A356 containing15%SiC composite was studied. Al/SiC composites have been considered because of their mechanical and erosion properties .Low fracture toughness in Al/SiC as compared with Aluminium alloys is one of its disadvantage. In this study at first A356 alloy was melted in a smelting electrical furnace then poured into the mould. A356-15% Si...

Bioglass-graphene oxide composites can be served as a high-potential candidate for biomedical applications due to its specific mechanical properties. In this study, the 45S5 bioactive glass (BG) - graphene oxide (GO) composite containing 2 wt. % GO was coated on titanium alloy via electrophoretic deposition process (EPD). The synthesized GO was incorporated into BG coating to improve the mechan...

Inspired by biological systems in which damage triggers an autonomic healing response, we have developed a polymer composite material that can heal itself when cracked. This paper summarizes the self-healing concept for polymeric composite materials and investigates fracture mechanics issues consequential to the development and optimization of this new class of materials. The self-healing mater...

By partitioning the total stresses in a damaged composite into either mechanical and residual stresses or into initial and perturbation stresses, it was possible to derive two exact results for the energy release rate due to crack growth. These general results automatically include the effects of residual stresses, tractionloaded cracks, and imperfect interfaces. These effects are normally not ...

Interlaminar fracture mechanics has proven useful for characterizing the onset of delaminations in composites and has been used with limited success primarily to investigate onset in fracture toughness specimens and laboratory size coupon type specimens. Future acceptance of the methodology by industry and certification authorities however, requires the successful demonstration of the methodolo...

The fracture mechanics examines the development and expansion of cracks in solids and how they affect the deformation of materials. The stress intensity factors at the tip of the crack and the critical stress intensity factors or fracture toughness of materials are considered in the relevant criteria. There are three main modes of applying forces to a crack including the tensile mode, shear mod...

Mode II delamination toughness of z-pin reinforced composite laminates is investigated using finite element (FE) method. The z-pin pullout process is simulated by the deformation and breakage of non-linear springs. A critical shear stress criterion based on linear elastic fracture mechanics is used to simulate crack growth in an end-notched-flexure (ENF) beam made of z-pinned laminates. The mod...

This article presents the investigative work conducted on the fracture toughness and microstructure of Al6061-9% graphite particulate composites. The requisite specimens for the fracture toughness testing were compact tension ones prepared using stir casting technique. The Al6061-9% graphite particulate metal matrix composite has been heat treated in the underaged condition. It is observed from...

The effect of prepolymerized particle fillers on fracture toughness of four commercial composite resins was studied. The ground surface morphology was examined with a field emission scanning electron microscope. Fracture toughness was determined by using single edge notched specimens. Acoustic Emission (AE), which is the elastic wave due to the release of energy from the localized sources of ma...