It is interesting to imagine what would happen when a mixture of soft-boiled eggs and stones is deformed together. A foil made of pure Ti is stronger than that made of Cu. When a composite Cu/Ti foil deforms, the harder Ti will penetrate into the softer Cu in the convex shapes according to previously reported results. In this paper, we describe the fabrication of multilayer Cu/Ti foils by the r...

Self-propagating exothermic formation reactions have been intensively studied in a variety of reactive multilayer foils, such as Ni/Al, Ni/Si, and Nb/Si foils. These foils contain numerous alternating nanoscale layers of elements with large negative heats of mixing. With a small thermal pulse, atoms diffuse normal to the layering and result in a rapid exothermic reaction. The heat produced is c...

In cold rolling of thin strips, i.e., foils (Thickness

This paper reports a new technique that combines the features of Accumulative Roll Bonding (ARB) and Asymmetric Rolling (AR). This technique has been developed to enable production of ultra-thin bimetallic foils. Initially, 1.5 mm thick AA1050 and AA6061 foils were roll-bonded using ARB at 200°C, with 50% reduction. The resulting 1.5 mm bimetallic foil was subsequently thinned to 0.04 mm throug...

Parts produced by microforming are becoming ever smaller. Similarly, the foils required in micro-machines are becoming ever thinner. The asymmetric rolling technique is capable of producing foils that are thinner than those produced by the conventional rolling technique. The difference between asymmetric rolling and conventional rolling is the 'cross-shear' zone. However, the influence of the c...

Based on the stochastic rolling force data from aluminum hot strip tandem mill, the ARMA time series model and the stochastic excitation power spectral density (PSD) model are established, and the stochastic rolling forces excitation model is established by utilizing Levenberg-Marquardt combined with generalized global planning algorithm. A two dimensional stochastic nonlinear dynamical model o...

Targets required to determine the parameters of the 100Mo(p,xn)99mTc reaction and to estimate the yield of the 99mTc production were prepared starting with powder material. Material, melted with electron beam gun into solid bead, was reshaped into foil mechanically. Targets were prepared by powder melting and hot flattening of the droplet followed by cold rolling. Procedure allowed preparation ...

Di€erent doses of high-energy Si (0.2±4.5 MeV) were implanted in polycrystalline Au foils (35 lm thick) to form a low melting point Au±Si alloy which can be used for gold soldering. A Au±Si eutectic structure has been observed in the implanted Au foils after annealing at 400°C for 1 h. The Au±Si liquid phase was di€used in the polycrystalline Au foil along the grain boundaries which were ̄atten...