Nanoparticles (NPs) are applied in a wide range of processes, and their use continues to increase. Fluidization is one of the best techniques available to disperse and process NPs. NPs cannot be fluidized individually; they fluidize as very porous agglomerates. The objective of this article is to review the developments in nanopowder fluidization. Often, it is needed to apply an assistance meth...

Effects of rapid heat transfer using a fluidized bed on the heat-treating response of Al-Si-Mg alloys (both unmodified and Sr modified) were investigated. The heating rate in the fluidized bed is greater than in conventional air convective furnaces. Particle size analyses of eutectic Si showed that the high heating rate during fluidized bed solution heat treatment causes faster fragmentation an...

Introduction Understanding the jetting phenomena near the gas distributor plate in a fluidized bed is important to gassolids mixing, heat and mass transfer, and erosion on any bed internals, which can all affect the performance of the bed. Moreover, acoustic vibration in a fluidized bed can be used to enhance the fluidization quality of particulate matter. Visualizing the jetting structure usin...

several methods are used to decrease seed drying time and enhance the quality of dried seeds. influidization methods, good aeration occurs during the drying process. in this research, conditioned seedswith 20% d.b. moisture content were dried at 30°, 40°, 50° and 60°c using three bed conditions (fixed,minimum fluidized, fluidized). all experiments were done using a batch-type fluidized bed drye...

Spirals as internals are utilized to reduce the axial mixing of solids in fluidized beds, by routing the solids flow in a predetermined route or by localizing the solids mixing. The drying kinetics of continuous fluidized bed with and without internals has been compared and modeled using batch drying kinetics and residence time distribution analysis. The batch drying experiments were conducted ...

The hydrodynamic studies of fluidized bed reactor has been reported in terms of pressure drop, minimum fluidization velocity and bed volume expansion to contribute to the optimization of the CNTs production parameters in fluidized bed reactors. Minimum fluidization velocity and pressure drop, as the most important parameters, were taken into account for the investigation of the hydrodynamic beh...

−The information of particle cluster dynamics is necessary for improving the performance of a circulating fluidized bed system. The main objective of this study is to compare the particle cluster diameters and concentrations from computational fluid dynamics simulation results between circulating fluidized bed riser and downer. The calculation methodologies are based on the concept of kinetic t...

High temperature Fischer-Tropsch synthesis process use fixed fluidized bed as a reactor. In order to understand the flow behavior in the fluidized bed better, the research of how the radial velocity affects the entire flow field is necessary. Laser Doppler Velocimetry (LDV) was used to study the radial velocity distribution along the diameter direction of the cross-section of the particle in a ...

Fluidized bed processing is a relatively novel method for coating metal substrates. A detailed study was carried out into surface property and in micro-structure changes induced by fluidized bed processing. In particular, fluidized bed processing of AA 6082 T6 aluminum alloy components using alumina Al2O3 powder was investigated. Firstly, the build up of Al2O3 films was studied and characterize...

The mechanism of vibration energy transfer in a vibrating fluidized bed (VFB) is reported in this paper. A series of sensors was employed to simultaneously detect pressure wave propagation signals at different positions at various heights in the fluidized bed. The mechanism of vibration energy transfer in an VFB is found by wave propagation. The pressure wave was produced from a vibrating base ...