The possibility of employing internal wall as mass absorber in rectangular water storage tanks subjected to harmonic ground motion excitation is investigated in this paper. Internal walls are used in these tanks usually for service performance purposes, which could be used as mass absorber to control seismic demand on tank's exterior walls. Derivation of the response of the coupled system inclu...

On the basis of the continuity equation and the Bernoulli equation in the steady form, a differential equation is developed to evaluate the successive water levels within compartments of an upright perforated wave absorber. Then the initial and boundary conditions are introduced and the differential equation is solved as an initial value problem. Finally the reflection coefficient from the wave...

In this paper, a novel flexible tunable metasurface absorber is proposed for large-scale remote ethanol sensor applications. The proposed metasurface absorber consists of periodic split-ring-cross resonators (SRCRs) and microfluidic channels. The SRCR patterns are inkjet-printed on paper using silver nanoparticle inks. The microfluidic channels are laser-etched on polydimethylsiloxane (PDMS) ma...

We present a broadband microwave metamaterial (MM) absorber, the unit cell of which consists of a lumped-resistor-loaded electric-inductive-capacitive (ELC) resonator and a cut-wire on the same side of a flexible polyimide substrate. In contrast to the common MM absorber, the metallic pattern layer of the proposed structure is placed parallel to the direction of propagation of the incident wave...

Nowadays, the application of floating breakwaters in small or recreational harbors has found more popularity. These types of breakwaters are more flexible in terms of design, configuration and especially installation compared with fixed breakwaters. In the current study, the performance of floating breakwater (FBs) under regular waves was studied using the physical modeling method. For the mode...

In this work, we have designed, fabricated and experimentally characterized a printed graphene nano-flakes enabled flexible and conformable wideband radar absorber. The absorber covers both X (8-12 GHz) and Ku (12-18 GHz) bands and is printed on flexible substrate using graphene nano-flakes conductive ink through stencil printing method. The measured results show that an effective absorption (a...

We propose novel RH-metamaterial structure of the Z-chip for improving the oblique incidence characteristics as an electromagnetic wave absorber. The basic characteristics of a wave absorber using a Z-chip is calculated by FDTD simulation at an oblique incidence. To demonstrate the efficiencies of the chip, a unit cell like a Z-chip was introduced to an actual computer controlled metamaterial e...

A metamaterial electromagnetic wave absorber consisting of a big circular ring patch with four smaller suppression circular rings is presented in this report. The metamaterial electromagnetic wave absorber introduces the concept of size reduction by suppressing the resonance frequency. An FR4 substrate was used and the incidental wave angles were varied from 0 0 to 60 0 . Simulations results sh...

Perfect metamaterial absorber (PMA) can intercept electromagnetic wave harmful for body in Wi-Fi, cell phones and home appliances that we are daily using and provide stealth function that military fighter, tank and warship can avoid radar detection. We reported new concept of water droplet-based PMA absorbing perfectly electromagnetic wave with water, an eco-friendly material which is very plen...