this research work is devoted to the development of a mathematical model for the simulation of the flow of polymeric melts through the die region of extruders. a set of governing equations are solved using finite element method. standard galerkin technique is used in conjunction with the mixed scheme to solve the flow equation. due to the non-linear nature of global equations, the picard iterat...

in this study, an extended stress-based forming limit diagram (fld) for prediction of necking based on the marciniak and kucznski (m-k) model is represented and applied in tube hydroforming. the bulge forming of a straight tube is simulated by finite element method and verified with published experimental data. this adaptive simulation technique is based on the ability to detect the onset and g...

introduction: with the rapid increase in use of lasers in medical treatments, it is important to understand the mechanisms of heat transfer in biological tissues in order to minimize damage to the tissues resulting from extra heat applied. the aim of this study is to investigate the temperature distribution in living biological tissues when laser irradiation is used in a treatment. methods:  in...

afinite element model is developed for simulation of the curing process of a thick axisymmetric rubber article reinforced by metal plates during the molding and cooling stages. the model consists of the heat transfer equation and a newly developed kinetics model for the determination of the state of cure in the rubber. the latter is based on the modification of the well-known kamal-sourour mode...

in this paper, single, bi-layered and three-layered tube hydroforming processes were numerically simulated using the finite element method. it was found that the final bulges heights resulted from the models were in good agreement with the experimental results. three types of modeling were kept with the same geometry, tube material and process parameters to be compared between the obtained hydr...

micro-electro-mechanical systems (mems) are combination of electrical and mechanical components in micron dimensions. in recent years, holding, actuating methods and handling of mems components such asmicrogripper, microsensors and etc. have been deeply studied. microgrippers for handling, positioning andassembling of micro components are very useful so that for clamping need actuation created ...

cold roll-forming is a process in which the roll of sheet is formed by passing continuously through the set of rotary rollers without changing thickness in a cool way until it is formed to the desired profile. in this paper a parametric study on the section twist angle in roll-forming the non-symmetric channel is presented, using finite element simulation. at first finite element simulation res...

in this paper, we use molecular dynamics and finite element simulations to determine the mechanical properties of single-crystal metal of silver (ag) with nano-holes. the lattice transition method from 3-dimensions into 2-dimentions in molecular dynamics simulation as well as plane stress model in finite element method, is used to lessen the simulation time consuming. elasticity module reductio...

drying is an important operational step in pistachio processing. there is a decrease in moisture content of pistachio nuts from 56-57% (d.b.) to 5-6% during the drying process. drying conditions affect the quality of dried pistachio nuts, therefore, this calls for an accurate description of the drying trend in the process. in this study finite element formulation and solution of diffusive moist...

in recent years, in order to reducing die design and manufacturing costs, multi point forming technique has gained an increasing interest because of its high flexibility. in this process, the conventional fixed shape solid die sets are replaced with a pair of opposite matrices of controllable elements. in this paper, the fundamental principles of multi-point forming was described and the possib...