The influence of the spatial distribution of the austenitic phase on the effective mechanical properties of a multiphase steel assisted by transformation-induced plasticity is analyzed using a numerical homogenization scheme. Representative three-dimensional volume elements with distinct microstructures are created applying a newly-developed algorithm based on the generation of a multilevel Vor...

in this paper, the nucleation and growth of diamond/diamond-like coatings on austenitic (aisi 316) and ferritic (aisi 430) stainless steel substrates have been investigated using torch technique. the effects of substrate surface preparation has also been studied. the quality of coatings produced has been examined using optical and scanning electron microscopy, x-ray diffraction, raman spectrosc...

P. Vaňová, J. Sojka. VŠB Technical u niversity of O strava, FMME, Ostrava, Czech Republic This paper is dealing with hydrogen embrittlement of austenitic-ferritic 2205 duplex steel using the slow strain rate test (SSRT). The original material was subjec ted to heat treatment under 700 °C during 5 hours and f ollowing aircooling with the aim of pr ovoking sigma phase pr ecipitation and embrittle...

One of the critical issues for the application of iron aluminide coatings is the loss of Al from the coating into the Fe-base substrate alloys which do not contain aluminum. The interdiffusion behavior between chemical vapor deposited (CVD) aluminide coatings and ferritic and austenitic substrates is being studied for times up to 10,000h in the temperature range of 500-800oC. Coatings were synt...

In this paper, the nucleation and growth of diamond/diamond-like coatings on austenitic (AISI 316) and ferritic (AISI 430) stainless steel substrates have been investigated using torch technique. The effects of substrate surface preparation has also been studied. The quality of coatings produced has been examined using optical and scanning electron microscopy, X-ray diffraction, Raman spectros...

In this paper, application of ultrasonic techniques for defect detection in weldments of austenitic stainless steel and maraging steel is discussed. Applications of ultrasonic techniques for characterizing microstructural changes in AISI type 316 stainless steel and modified 9Cr-1Mo ferritic steel; thermomechanical processing of 15Cr-15Ni-2.3Mo-titanium modified austenitic stainless steel (allo...

In this paper, the nucleation and growth of diamond/diamond-like coatings on austenitic (AISI 316) and ferritic (AISI 430) stainless steel substrates have been investigated using torch technique. The effects of substrate surface preparation has also been studied. The quality of coatings produced has been examined using optical and scanning electron microscopy, X-ray diffraction, Raman spectros...

This multi-layer program has examined the oxidation resistance of Al-rich coatings made by chemical vapor deposition and pack cementation on ferritic-martensitic (e.g. T91, Fe-9Cr-1Mo) and austenitic (Type 304L, Fe-18Cr-8Ni) substrates at 650°-800°C. The main goal of this work was to demonstrate the potential benefits and problems with alumina-forming coatings. To evaluate their performance, ox...

Duplex stainless steels (DSSs) with austenitic and ferritic phases have been increasingly used for many industrial applications due to their good mechanical properties and corrosion resistance in acidic, caustic and marine environments. However, DSSs are susceptible to intergranular, pitting and stress corrosion in corrosive environments due to the formation of secondary phases. Such phases are...

Many of the degradation mechanisms relevant to power plant components can be exacerbated by stresses that reside within the material. Good design or structural integrity assessments require therefore, an accounting of residual stresses, which often are introduced during welding. To do this it is necessary to characterise the stresses, but this may not be possible in thick components using non-d...