exergy analysis and response surface methodology (rsm) is applied to reduce the exergy loss and improve energy and exergy efficiency of acetic acid production plant. exergy analysis is run as a thermodynamic tool to assess exergy loss in reactor and towers of acetic acid production process. the process is simulated in aspen plus(v.8.4) simulator and the necessary thermodynamics data for calcula...

This study proposes the concept of the local heat loss coefficient and examines the calculation method for the average heat loss coefficient and the average absorber plate temperature. It also presents an exergy analysis model of flat plate collectors, considering non-uniformity in temperature distribution along the absorber plate. The computation results agree well with experimental data. The ...

Cogeneration may be defined as a system which contains electricity production and regain of the thermo value of exhaust gases simultaneously. The examination is based on the data’s of an active cogeneration plant. This study, it is aimed to determine which component of the system should be revised first to raise the efficiency and decrease the loss of exergy. For this purpose, second law analys...

Exergy analysis and response surface methodology (RSM) is applied to reduce the exergy loss and improve energy and exergy efficiency of acetic acid production plant. Exergy analysis is run as a thermodynamic tool to assess exergy loss in reactor and towers of acetic acid production process. The process is simulated in Aspen Plus(v.8.4) simulator and the necessary thermodynamics data for calcula...

An energy flow model of an airport terminal’s HVAC system is established in this paper. Based on energy flow model, the exergy efficiency, exergy loss and exergy cost distribution ratio of each component are calculated and analyzed by the energy flow model. Optimization method and exergy balance equations are used to calculate the lowest exergy loss of HVAC system under different operation cond...

In this work, we present the application of exergy analysis in the evaluation of the ethanol steam reforming (ESR) process in a catalytic membrane reactor (CMR) containing Pd-Ag membranes sandwiched by PdRh/CeO2 catalyst to produce fuel cell grade pure hydrogen (no sweep gas). ESR experiments were performed at T=873-923 K and P=4-12 bar. The fuel was a mixture of ethanol and distilled water wit...

This paper introduces the dual-mode refrigeration system for ice storage air conditioning. A computational model relating to the exergy loss amount and loss rate is developed in each component of the refrigeration cycle loop. A case study is presented to demonstrate the applicability of the model developed. Exergy analysis results of the refrigeration system in ice storage operating mode are co...

in this paper the energy and exergy analyses in chamber drying process of thin layer drying of tomato in a forced solar drying was investigated. the experiments were carried out with two thicknesses of 5 and 7 and two airflows 0.5 m.s-1 and 1 m.s-1. during the experimental process, ambient temperature was between 22 and 36 , air relative humidity between was 14 and 50, and solar radiation range...

In order to evaluate and improve the performance of a ground-coupled heat pump (GCHP) heating system with radiant floors as terminals, an exergy analysis based on test results is performed in this study. The system is divided into four subsystems, and the exergy loss and exergy efficiency of each subsystem are calculated using the expressions derived based on exergy balance equations. The avera...