As a surface finish, electroless nickel / electroless palladium / immersion gold (ENEPIG) has received increased attention for both packaging/IC-substrate and PWB applications. With a lower gold thickness compared to conventional electroless nickel / immersion gold (ENIG) the ENEPIG finish offers the potential for higher reliability, better performance and reduced cost.[1,2] This paper shows th...

Electroless nickel plating is a widely used plating method in many industries. The usability of the coating is, however, restricted by the control problems related to the electroless nickel plating process. To ensure deposit quality, the transcendent properties of electroless nickel deposit should be accurately controlled during plating, which is challenging because of the spontaneous, unstable...

Electroless nickel is often plated on the surface of aluminum mirrors to improve the ability to polish the mirror surface. Electroless nickel plating can cause a bimetallic effect, creating distortion of a mirror surface if it is heated or cooled. Published data listing the thermal coefficient of expansion and Young’s modulus as a function of temperature for electroless nickel is not readily av...

In this talk, we report a research work on fabrication and metallization of high aspect ratio polymer microstructures fabricated using UV lithography of SU-8 on silicon substrate. Electroless plating of metal film on both the top and sidewall surfaces of microstructures were achieved while the silicon substrate was not plated. The primary chemical mechanisms and possible applications were also ...

ni-p and ni layers multilayer coatings were applied to az31 magnesium alloy utilizing electroless and electrodeposition procedures. the aim of the project was to decrease cracks and increase corrosion resistance of the coatings. in order to compare the coatings, the effect of single layer electroless ni-p coatings with different thicknesses was also investigated. the microstructure and phase co...

The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating cha...

Very often electroless electrolytes contribute to wastewater treatment problems. These electrolytes are used in electroless plating processes, which contain a variety of chemicals to meet special surface treatment requirements. Metal salts produce the base material for metal deposition and hypophosphite is delivering the electrons for the metal reduction process – it is basically the internal e...

We have employed electroless deposition to prepare smooth films (mirrors) of silver that could be used as substrates in microcontact printing (μCP) of alkanethiols. Good-quality SAMs of hexadecanethiolate were formed on thin films of electroless silver by printing with an elastomeric stamp; these SAMs were effective resists in protecting the underlying silver from etching in an aqueous ferricya...

The electroless coating technique is one of the elegant methods available for the production of protective coatings on surface. Our study has been aimed at the conditions of the electroless deposition of copper coating onto the iron powder particles from sulphate electrolyte. The course of the electroless process depends on the composition and pH of the electrolyte as well as on the size and co...

The information contained in this publication has been compiled from the literature and through communication with recognized experts within the metal finishing industry. It is presented as a guide to the use of electroless nickel for engineers, metallurgists, designers and others involved in materials selection. The important properties of electroless nickel deposits are described and examples...