In sheet metal forming processes with complex strain paths, a part is subjected to large plastic deformation. This severe plastic deformation leads to high plastic strain localization zones and subsequent accumulation of those strains. Then internal and superficial micro-defects and in other words ductile damage is created. This damage causes quality problems such as fracture. Therefore, design...

Offshore pipelines are usually constructed by the use of girth welds, while welds may naturally contain flaws. Currently, fracture assessment procedures such as BS 7910 are based on the stress-based methods and their responses for situations with large plastic strain is suspicious. DNV-OS-F101 with limited modifications proposes a strain-based procedure for such plastic loads. In this paper 3D ...

A constitutive multi-laminate based elastic-plastic model developed to be capable of accounting induced anisotropic behavior of granular material such as sand. The fabric feature or grain orientation characteristic effects through medium are considered in a rational way under any complex stress path, including cyclic loading. The salient feature of the developed model is a non-associative on pl...

In a unified approach, the virtual work equations in rate form and in incremental forms are derived rigorously for elastic-plastic continuum subjected to large strains. T h e finite element p r d u r e s for the analyses of clastic-plastic solid b a d on Lee’s theory and the Green-Naghdi theory arc presented. Also, i t i s shown that transformations can be performed among the Eulerian, the Tota...

The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

X-ray diffraction measurement in the bulk of engineering components allows evaluation of lattice spacing variation by application of Bragg law and hence, by comparison with a strain-free reference specimen, computation of elastic strains and stresses. Diffraction peak position is related to average elastic strain within the scattering grains, whilst diffraction peak shape is related to crystall...

The expressions for the free energy in two recent formulations of strain gradient plasticity are extended to include the locked-in strain energy around statistically stored dislocations. This is accomplished by using the strain dependent factor h(ep), which represents the fraction of the rate of plastic work converted into heat in accordance with the latent heat measurements from classical meta...

the brass tubes with foam cores of alsi7sic3, alsi7sic3fe1 and alsi7sic3fe3 were produced as the crush-boxes with circle and square cross-section. then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. the uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...