electric arc furnace (eaf) is one of the largest loads in electric power systems. it is highly time varying and nonlinear. its reactive power variations cause voltage fluctuations in nearby system which is known as flicker. on the other hand the nonlinear voltage-current characteristic causes strong voltage and current harmonics in eaf. to this end flexible ac transmission systems (facts) techn...

Electric arc furnace (EAF) is one of the largest loads in electric power systems. It is highly time varying and nonlinear. Its reactive power variations cause voltage fluctuations in nearby system which is known as flicker. On the other hand the nonlinear voltage-current characteristic causes strong voltage and current harmonics in EAF. To this end Flexible AC Transmission Systems (FACTS) techn...

A linearised model of the power system with the Electrical Arc Furnace (EAF) and the Unified Power Quality Conditioner (UPQC) has been used in the frequency domain for finding an optimum control strategy of the UPQC. The analysis indicates that the most effective may be such an application of the UPQC where the parallel Active Filter (AF) compensates the whole reactive power consumed by the EAF...

This investigation develops a revisable method for estimating the estimate value of equivalent 10 Hz voltage flicker (DV10) of a DC Electric Arc Furnace (EAF). This study also discusses three 161kV DC EAFs by field measurement, with those results indicating that the estimated DV10 value is significantly smaller than the survey value. The key point is that the conventional means of estimating DV...

This paper present the results obtained by simulation for the functioning regime improvement of an UHP Electric Arc Furnace. Because the nonlinearity of the electric arc the EAF functioning regime are perturbed from three causes: the current harmonics, the reactive power and the unbalanced load. In this paper there are study the possibilities of harmonics filtering and compensate the reactive p...

The electrical arc furnace (EAF) load is the largest load in power systems. Since electromechanical interactions between electrical loads and turbine-generator are seldom discussed, this paper investigates the torsional vibrations in turbine-generator shafts and blades subject to real and reactive power variations from a large-scale EAF plant. The transient power fluctuation of the load is rand...

Phenolic rich ethyl acetate fraction (EAF) from lotus leaves was prepared and its bioactive components, antioxidant and cytoprotective effects were investigated. EAF showed high total phenolic content and flavonoid content and contained rutin (11,331.3±4.5 mg/100 g EAF), catechin (10,853.8±5.8 mg/100 g EAF), sinapic acid (1,961.3±5.6 mg/100 g EAF), chlorogenic acid (631.9±2.3 mg/100 g EAF), syr...

Power quality is becoming a more concern of today’s power system engineer due to rapid growth of non-linear loads in distribution network. Electrical Arc Furnace (EAF) is one of the responsible causes for deteriorating power quality in the distribution network. Hence electric arc furnace model is needed to study and to analyze the power quality in the distribution network. This paper presents a...

Electric arc furnaces (EAFs) are widely used in steelmaking and in smelting of nonferrous metals. The EAF is the central process of the so-called mini-mills, which produce steel mainly from scrap. Typical EAFs operate at power levels from 10MW to 100MW. The power level is directly related to production throughput, so it is important to control the EAF at the highest possible average power with ...

The electric arc furnace is a three-phase load representing one of the most important generator of harmonic currents, reactive power and unbalanced conditions in electrical power systems. This paper aims to achieve a study concerning the power quality of the energy at 3-phase electric arc furnaces. There are analyzed the main qualitative indicators of the electric power: power factor, reactive ...