eunsteady slip-flow of second grade non-newtonian electrically conducting fluid over an oscillating sheet has been considered and solved numerically. a second-order slip velocity model is used to predict the flow characteristic over the wall. with the assumption of infinite length in the x-direction, the velocity of the fluid can be assumed as a function of y and t, hence, with proper change va...

rapid urban growth is resulting into increase in travel demand and private vehicle ownership in urban areas. in the present scenario the existing infrastructure has failed to match the demand that leads to traffic congestion, vehicular pollution and accidents. with traffic congestion augmentation on the road, delay of commuters has increased and reliability of road network has decreased. four s...

in this research, numerical simulation of a symmetric impact of a 2-d wedge, considering dynamic equations in two-phase flow is taken into account. the two-phase flow around the wedge is solved based on finite volume method and volume of fluid (vof) scheme. the dynamic mesh model is used to simulate dynamic motion of the wedge, thereby the effects of different dynamic meshes in both structured ...

the complete 3d nonlinear dynamic problem of extensible, flexible risers conveying fluid is considered. for describing the dynamics of the system, the newtonian derivation procedure is followed. the velocity field inside the pipe formulated using hydrostatic and bernoulli equations. the hydrodynamic effects of external fluids are taken into consideration through the nonlinear drag forces in var...

in this work dynamic recrystallization behavior of aisi 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 c -1200 c and strain rate range of 0.001 s-1 - 1 s-1. the obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. the flow stress and strain corresponding to the critical, pe...

Inverse maximum flow (IMDF), is among the most important problems in the field ofdynamic network flow, which has been considered the Euclidean norms measure in previousresearches. However, recent studies have mainly focused on the inverse problems under theHamming distance measure due to their practical and important applications. In this paper,we studies a general approach for handling the inv...

pavement permanent deformations due to lack of shear strength in mixture are a major reason of rutting. any simple test to determine mixtures resistance to permanent deformation isn’t distinguished in the 1st level of superpave mix design method and prevalent methods for evaluating mixture rut resistance are expensive and time-consuming. two aggregate types, gradations, asphalt cements and fill...

In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. The flow stress and strain corresponding to the critical, pe...

effect of small al additions, from 0.14% to 0.31% ai, on the hot deformation behavior of low carbon steels containing 1%cu-1.2%mn was investigated in the temperature range of 750-800•c over the strain rate range of 1o.3.1o.1s•1 by a hot compression testing machine. the flow curves obtained, exhibited typical characteristics of dynamic recovery type of softening mechanism, and the critical strai...

In this research, numerical simulation of a symmetric impact of a 2-D wedge, considering dynamic equations in two-phase flow is taken into account. The two-phase flow around the wedge is solved based on finite volume method and volume of fluid (VOF) scheme. The dynamic mesh model is used to simulate dynamic motion of the wedge, thereby the effects of different dynamic meshes in both structured ...