This study has investigated the creep properties of asphaltic concrete modified with different dosages of waste polyethylene terephthalate (PET) in two different ranges of size. Uniaxial dynamic creep test at 40°C was conducted on the cylindrical specimens of the mixtures. The load was applied in two different frequencies of 0.5 and 5Hz. Creep test results showed that the accumulated strain und...

pavement permanent deformations due to lack of shear strength in mixture are a major reason of rutting. any simple test to determine mixtures resistance to permanent deformation isn’t distinguished in the 1st level of superpave mix design method and prevalent methods for evaluating mixture rut resistance are expensive and time-consuming. two aggregate types, gradations, asphalt cements and fill...

This research aims to explore the dynamic characteristics and settlement prediction of soft soil. Accordingly, the dynamic shear modulus formula considering the vibration frequency was utilized and the dynamic triaxial test conducted to verify the validity of the formula. Subsequently, the formula was applied to the dynamic creep strain function, with the factors influencing the improved dynami...

A large number of cyclic torsional shear tests on saturated soft clay under unconsolidated undrained condition have been carried out. The changing law between accumulative generalized shear strains vs. failure numbers has been analyzed and a cyclic shear strength curve has been received based on cyclic torsional shear tests. According to the test results, the criterion of saturated soft clay is...

spark plasma sintering (sps) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. owing to the advantage of rapid heating, the alumina ceramics obtained by sps have a grain size and density comparable to those of hot pressed ones. the increase of densification rate may be related to some difference in ion transport characteristics. this study...

The tail tendons from wallabies (Macropus rufogriseus) suffer creep rupture at stresses of 10 MPa or above, whereas their yield stress in a dynamic test is about 144 MPa. At stresses between 20 and 80 MPa, the time-to-rupture decreases exponentially with stress, but at 10 MPa, the lifetime is well above this exponential. For comparison, the stress on a wallaby tail tendon, when its muscle contr...

Judicious and regulated use of wood as a building material is better than that of many other conventional materials in terms of environmental issues of this century. The study of the behavior of wood requires a better understanding of the characteristics in different possible cases of loading including loads applied instantly, loads applied for a short time and loads applied for a long time. Th...

the effect of impact modifier on creep behavior of wood flour- recycled polypropylene composites has been evaluated in this work. for this purpose, impact modifier (ethylene vinyl acetate) and recycled polypropylene were mixed with wood flour (50/50% w/w) as well as the impact modifier (0, 3%, 6% and 9%) by a counter-rotating twin-screw extruder to manufacture the wood flour- recycled polypropy...

Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...

in petrochemical industry, the production of polyvinyl chloride (pvc) is accompanied by formation of heavy end wastes which consist of a mixture of di and multichloro compounds as kind of materials which are generated in ethylene dichloride (edc) purifcation. a high quantity of chloro compounds found in the heavy end waste allows it to be polymerized with alkaline polysulfdes to form polysulfde...