In this study, a novel dual-nozzle ejector enhanced vapor-compression cycle (DEVC) for solar assisted airsource heat pump systems is proposed. In DEVC, the use of the dual-nozzle ejector for recovering the expansion losses is a very promising approach to improve the cycle performance. A mathematical model of the DEVC is developed to predict its performance under specified operating conditions. ...

This paper presents the analysis of a two phase flow ejector for the transcritical CO2 cycle. A detailed simulation model of a two phase flow ejector was developed. A controllable ejector expansion device was designed, constructed, and installed in a transcritical CO2 experimental air conditioning system. System-level experimental results were obtained at different operation conditions and vari...

The two-phase ejector refrigeration cycle (TPERC) system with a two-throat nozzle ejector was investigated experimentally, and the entrainment ratio of the ejector and the COP of the system were compared with those of the ejector with Laval nozzle and its TPERC system respectively. The experimental results indicate that under the working condition of the evaporating/condensing temperatures 1°C/...

Expansion work recovery by two-phase ejector is known to be beneficial to vapor compression cycle performance. However, one of the biggest challenges with ejector vapor compression cycle is that the ejector cycle performance is sensitive to working condition changes which are common in real world applications. Different working conditions require different ejector geometries to achieve maximum ...

Abstract The following work documents the effect of streamwise vortices generated at the nozzle exit of an axisymmetric air jet on the amount of mass entrained into an ejector. In an experimental analysis of the mass entrainment of circular jet ejectors, we found that the introduction of half delta wing vortex generators in the exit of the jet nozzle (Reynolds number of 50,000) increased the am...

A miniature steam ejector refrigeration system embedded with a capillary pump loop can result in a compact design which can be used for electronics cooling. In this paper, computational fluid dynamics (CFD) is employed to investigate the effects of the area ratio of the ejector constant-area mixing section to the nozzle throat, the length of the constant-area section, and the nozzle exit positi...

One possible method of reducing jet noise at takeoff is the use of an ejector in which the propelling nozzle discharges into a shroud and thereby induces a secondary flow. The present report describes an experiment on the aerodynamics of such systems. The primary nozzle was axisymmetric and convergent and the shrouds were cylindrical with faired convergent entries. The stagnation temperatures o...

Ejectors are known to be beneficial to vapor compression cycle performance as they can recover the kinetic energy released during the expansion instead of dissipating it in a throttling process. It is desirable to introduce an adjustable feature to the ejector so that ejector cycle performance can be optimized under different working conditions, which could make ejector technology more suitable...

in this article, an algorithm for designing of a supersonic wind tunnel injection nozzle ejector is presented and based on this algorithm, a new ejector is designed for a supersonic wind tunnel. the injection nozzle consists of a volute, a nozzle, and several vanes. designed injection nozzle is simulated numerically, and the results are compared with the present injection nozzle. the results sh...

The basic transcritical CO2 systems exhibit low energy efficiency due to their large throttling loss. Replacing the throttle valve with an ejector is an effective measure for recovering some of the energy lost in the expansion process. In this paper, a thermodynamic model of the ejector-expansion transcritical CO2 refrigeration cycle is developed. The effect of the suction nozzle pressure drop ...