in this study, the effect of nano-silver (ag) treatment on the drying rate and final moisture gradient of poplar wood was investigated. poplar (populous nigra) boards with green dimensions of 100×70×50 and 20 mm were treated with nano-silver (ag) suspension by spraying and immersion method. two concentrations of nano-silver suspension, including 20 and 100 ppm were used. then, the boards were c...

In this study wheat straw was taken from Ankara province. In order to produce dry process MDF, urea formaldehyde resin was used at the ratio of 8 %, 10 % and 12 %, 1 % ammonium chloride was used as hardening agent on the basis of dry fiber weight. On the other hand, 5, 6 and 7 min. pressing times were applied. Alcohol benzene, cold water, hot water and 1 % NaOH solubility of wheat straw were 5....

in this study, medium density fiberboard (mdf), was produced by dry process using refined fibers from choob khazare caspian amol factory, with 3 levels of urea formaldehyde adhesive at 8, 10, and 12 percent, and 3 levels of paraffin at 0.5, 1, and 1.5 percent. from every treatment, cylindrical samples for permeability measurement with 13 mm in diameter, and 30 mm of height were cut using hole-s...

In this study, a new technical process for hardening wood fiber insulation boards is introduced. During the dry-process, the fibers are usually glued with polymeric-diphenylmethane-diisocyanate (pMDI) and hardened to wood fiber insulation boards using a steam-air mixture. However, the maximum temperature reached in the steam-air process was 100 °C, and it was impossible to use an alternative bi...

INTRODUCTION Orthopedic physical therapists employ a wide range of intervention strategies to reduce patients’ pain and improve function. From time to time, new treatment approaches are being introduced to the field of physical therapy. The arrival of manual therapy in the United States is a good example. Although for several decades, manual physical therapy was already an essential part of the...

medium density fiberboard (mdf) was produced using moist depithed bagasse stored dry or wet. the duration of storage for either method varied between 0 to 4 months. two steaming temperatures of 175c and 185c were also used. mdf boards were produced in the laboratory and the common mechanical and physical properties were measured and compared. results showed that an increased steaming temperat...

The aim of this study was to investigate the applicability sugar beet pulp (SBP) in particleboard production as a substitute for wood material. Two variants board density, 650 kg/m3 and 550 kg/m3, containing 0%, 25% 50% SPB, were evaluated. During following features measured: modulus rupture (MOR), elasticity (MOE), thickness swelling (TS) water absorption (WA). results showed that boards up SB...

partial replacement of formaldehyde with furfural in the urea-formaldehyde resin on the formaldehydeemission, physical and mechanical properties of particleboard was investigated. the modulus ofrupture (mor), modulus of elasticity (moe), internal bond (ib), water absorption (wa), thicknessswelling (ts) and formaldehyde emission (fe) of poplar particleboards made with the modifiedresins were mea...