Biomass mainly in the form of wood is the oldest form of energy used by humans. Biomass generally means a relatively dry solid of natural matter that has been specifically grown or has originated as waste or residue from handling such materials. The thermochemical conversion of biomass (pyrolysis, gasification, combustion) is one of the most promising non-nuclear forms of future energy. In the ...

Kinetics-free equilibrium models can predict the exit gas composition of the biomass gasifier, given the solid composition and the equilibrium temperature, but they cannot be used for reactor design. Hence, there is a need to develop a combined transport and kinetic model which takes into account of the kinetics of homogeneous and heterogeneous chemical reactions, transport of volatiles produce...

Biomass is the oldest form of energy used by human beings, mainly in the form of wood. It is a renewable source of energy and has many advantages from an ecological point of view. The direct combustion of biomass generates concern among environmentalists, as it is incomplete and inconsistent and may produce organic particulate matter, carbon monoxide and other organic gases. Biomass gasificatio...

Kinetics-free equilibrium models can predict the exit gas composition, given the solid composition and the equilibrium temperature, but they cannot be used for reactor design Hence, there is a need to develop a combined transport and kinetic model which takes into account of the kinetics of homogeneous and heterogeneous chemical reactions, transport of volatiles produced, heat and mass transfer...

Computational Fluid Dynamic (CFD) modeling applications of the biomass gasification process help to optimize the gasifier. This study aims to investigate the impact of several physical parameters on the behavior of gasification in a fixed-bed downdraft gasifier. To that end, the study presents a comparison of the results computed using the Fire Dynamics Simulator (FDS) model with experimental r...

The co-disposal of densified sludge and wastepaper in a co-current flow packed bed gasifier represents new application of the thermal gasification process. Advantages of this technolo a gy include lower costs than other incineration or pyrolysis technologies, simple construction and operation, and the ability to a variety of fuels including agricultural wastes and other b.iomass materials in ad...

A study was conducted to quantify tar formation in a stratified downdraft gasifier using wood pellets. The effect of biomass flow rate on tar concentration was also analyzed, and more than thirty compounds in tar were quantified. Among the different compounds in tar, tertiary condensed products such as toluene, o/p-xylene, naphthalene, phenol, styrene, and indene were observed in significant am...

Rubber wood (Ficus elastica) is one the biomass waste that can be used as raw material for a gasification process and has a calorific value of 4,069 cal/gram. Gasification is a process to convert a solid fuel to syngas (CO, CH4, and H2) through a combustion process using limited air between 20% to 40% of air stoichiometry. Depending on the direction of airflow, the gasifiers are classified as u...

A process of conversion of solid carbonaceous fuel into combustible gas by partial combustion is known as gasification. The resulting gas, known as producer gas, is more versatile in its use than the original solid biomass. In the present study, a downdraft biomass gasifier is used to carry out the gasification experiments with the waste generated while making furniture in the carpentry section...