in this paper, dissimilar resistance spot welding of aisi 1075 eutectoid steel to aisi 201 stainless steel is investigated experimentally. for this purpose, the experiments are designed using response surface methodology and based on four-factor, five-level central composite design. the effects of process parameters such as welding current, welding time, cooling time and electrode force are inv...

In this paper, dissimilar resistance spot welding of AISI 1075 eutectoid steel to AISI 201 stainless steel is investigated experimentally. For this purpose, the experiments are designed using response surface methodology and based on four-factor, five-level central composite design. The effects of process parameters such as welding current, welding time, cooling time and electrode force are inv...

Resistance spot welding (RSW) has been used widely to join sheet metals. It has been a challenge to get required weld quality in spot welding of dissimilar thickness materials. Weld parameters are not generally available in standards for thickness beyond 4mm. This paper presents the welding process design and parameter optimization of RSW used in joining of low carbon steel sheet of thickness 0...

This work aims at investigating the spot weldability of a new advanced Quenching and Partitioning (Q&P) steel and a Transformation Induced Plasticity (TRIP) steel for automotive applications by evaluating the effects of the main welding parameters on the mechanical performance of their dissimilar spot welds. The welding current, the electrode tip voltage and the electrical resistance of sheet s...

An attempt made to optimize the operating parameters involved in an autogenous pulsed Nd: YAG laser welding process of similar and dissimilar combinations of butt joint of 2 mm thick 316 L stainless steel and mild steel. Influence of prominent laser welding parameters such as average peak power, defocus position, spot position, and shielding gas were investigated for welded joints considered. T...

The performance of laser welding of Ti and two dental precious alloys (Ag-Pd-Au, Au-Pt-Ag) was investigated by mechanical testing and microscopic observation, using butt joint as design. The laser irradiation was done using a commercial Nd:YAG dental laser-welding device in a single pulse mode with output currents 150, 200, 250, 300A, spot diameters 0.6, 0.9, 1.2mm, and pulse duration 10ms. The...

Taking the resistance spot welding of automotive steel DC04-HC420LA as an example, failure forces including cross tensile, shear tensile and pull-out tests were obtained in test for dissimilar materials. The fracture model materials was established by finite element analysis method. It compared with experimental data to verify accuracy solder joint mode. And then material card calibrated verifi...

resistance spot welding is an important manufacturing process in the automotive industry for assembling bodies. the quality and strength of the welds and, by extension, the body is mainly defined by the quality of the weld nuggets. the most effective parameters in this process are sheet material, geometry of electrodes, electrode force, current intensity, welding time and sheet thickness. the p...