In this paper, analysis, design and implementation of non-isolated soft-switching bidirectional DCDC converter with an active switch are described. The proposed topology gives the output voltage as twice as the input voltage and enhances the efficiency up to 94.5% and 92.9% for boost and buck mode operation by proper selection of the duty cycle. Soft switching can be achieved at both steps up a...

This paper reports a new functional design and modeling of a vibration energy harvester composed from a mechanical resonator (MEMS), capacitive transducer and a conditioning circuit based on the BUCK DCDC converter architecture. The basic configuration of conditioning circuit from [1][2] is enhanced with two major features for the power management allowing, firstly, to adapt dynamically to the ...

A novel integrated buck-flyback non isolated power factor (PF) correction (PFC) converter is proposed in this paper. This new converter is an inherent integration of a buck converter and a flyback converter, which operates in either flyback mode or buck mode according to whether the input voltage is lower or higher than the output voltage. In this way, the dead zones of ac input current in trad...

-The simulation of a nonlinear controller with power sharing control capabilities for a wind energy system double input buck boost–buck boost converter is presented. A multiple-input DC–DC converter is useful to obtain the regulated output voltage from input power source such as a wind array. Double input DC-DC buck boost converter principle of operation and the equations describing the convert...

Controlling of DC-DC converter is vital task in power conversion. DC-DC converters are used in many applications like solar charger, computer power supplies, switching mode regulators, aircrafts etc. Focus of this paper is to model a controlling system for buck converter which controls output of buck converter constant instead of changing load and input supply to buck converter. Controlling met...

Single-Stage transformerless AC/DC converter received much attention in the universal line application. Unlike the existing converters a new high step-down transformerless single-stage single-switch AC/DC converter is proposed. The topology integrates a buck-buck-boost converter with low intermediate bus and output voltage. The converter utilizes a buck converter as a PFC cell and buck-boost co...

This paper presents, linear peak current mode controller for the control of DC/DC buck converter is designed and analyzed. Dynamic equations describing the buck converter are derived and linear peak current mode controller is designed. The buck converter, the voltage mode and current mode controller are modeled and are evaluated by computer simulations. The proposed technique has the advantages...

In this paper a single-inductor dual-output (SIDO) buck-boost PFC converter operating in critical conduction mode (CRM) is proposed. By multiplexing a single inductor, each output of SIDO buck-boost converter can be regulated independently. Compared with conventional two-stage multiple output converter, SIDO buck-boost PFC converter benefits from significant overall cost saving, small size and ...

This paper proposes an improved control method based on modified Delta-Sigma Modulator (DSM) to enhance transient response and improve harmonic contents of buck DC-DC converter. The main advantages of the proposed method are improving the output voltage frequency spectrum, correction of the output voltage harmonic contents and sideband harmonics, reduction of switching noise peaks at the output...

The DC transfer functions for the buck, boost, and Cuk PWM DC-DC converters in continuous conductionmodearell, l / ( l D ) , and-D/( l -D) respectively, ,where D is the duty cycle. Therefore. it is reasonable to expect that the Cuk PWh4 DC-DC converter circuit [l] can be synthesized by cascading boost and buck converter circuits. The purpose of this paper is to present a systematic and rigorous...