mixed clayey soils occur as mixtures of sand (or gravel) and clay in widely varying proportions. their engineering behavior has not been comprehensively studied yet. an experimental program, comprising monotonic, cyclic, and post-cyclic triaxial tests was undertaken on compacted clay-granular material mixtures, having different proportions of clay and sand or gravel. this paper presents the res...

Dynamic behavior of soil are evaluated relative to a number of factors including: strain level, density, number of cycles, material type, fine content, geosynthetic inclusion, saturation, and effective stress .This paper investigate the dynamic behavior of saturated reinforced sand under cyclic stress condition. The cyclic triaxial tests are conducted on remolded specimens under various CSR whi...

laboratory data, which relate the liquefaction resistance of firoozkooh sand and non-plastic silt mixtures to shear wave velocity are presented and compared to liquefaction criteria derived from seismic field measurements by andrus and stokoe [1]. in the work described herein, cyclic triaxial and resonant column tests were conducted on specimens of clean sand and sand-silt mixtures with silt co...

The liquefaction resistance of soil can be evaluated using laboratory tests such as cyclic simple shear, cyclic triaxial, cyclic torsional shear as well as field methods like Standard Penetration Test (SPT), Cone Penetration Test (CPT) and Shear Wave Velocity (Vs). In this regard, this study attempts to compare the results of the SPT based on the simplified procedure proposed by Seed and Idriss...

in this study, a researching program is conducted by cyclic triaxial test to determine the post-cyclic behavior of bushehr carbonate sand retrieved from the north of the persian gulf, under anisotropic consolidation at 200 kpa confining pressure. the article compares the post-cyclic monotonic strength and excess pore water pressures generated after the test with the pre-cyclic monotonic results...

the liquefaction resistance of soil can be evaluated using laboratory tests such as cyclic simple shear, cyclic triaxial, cyclic torsional shear as well as field methods like standard penetration test (spt), cone penetration test (cpt) and shear wave velocity (vs). in this regard, this study attempts to compare the results of the spt based on the simplified procedure proposed by seed and idriss...

this paper presents the results of a series of monotonic and post-cyclic triaxial tests carried out on a clay specimen and three types of clay-sand mixed specimens. the focus of the paper is on the post-cyclic mechanical behavior of the mixed specimens, as compared to their monotonic behavior. analyses of the tests results show that cyclic loading degrade undrained shear strength and deformatio...

A large number of cyclic torsional shear tests on saturated soft clay under unconsolidated undrained condition have been carried out. The changing law between accumulative generalized shear strains vs. failure numbers has been analyzed and a cyclic shear strength curve has been received based on cyclic torsional shear tests. According to the test results, the criterion of saturated soft clay is...