Since the cutting tools used in machining process of super alloys are subjected to high cutting forces, accordingly tools life is reduced, therefore improvement in alloys machining and reducing cutting forces to achieve longer tools life is an essential necessity. In this research, the effect of changes in feed rate on cutting forces in machining process of nickel based super alloys is investig...

This article reports the effects of various artificial aging methods and lubrication modes (dry, mist, wet) on the recorded cutting forces and chip morphology in drilling Al-Si-Mg (A356) cast alloys. In the course of this work, the work part sampled were as-received alloy (T0), solution heat-treated alloy (SHT) and then aged alloys at 155°C, 180°C, and 220°C (T4, T6, T61, T7), respectively. The...

 In the present study, an attempt has been made to experimentally investigate the effects of cutting parameters on cutting force in end milling of AISI 304 steel with solid carbide tools. Experiments were conducted based on four factors and five level central composite rotatable design. Mathematical model has been developed to predict the cutting forces in terms of cutting parameters such as he...

An instantaneous rigid force model for prediction of cutting forces in ball-end milling of  sculptured surfaces is presented in this paper. A commercially available geometric engine is used to represent the cutting edge, cutter and updated part geometries. The cutter used in this work is an insert type ball-end mill. Intersecting an inclined plane with the cutter ball nose generates the cutting...

The effect of cutting parameters and tool parameters on cutting forces and tool wear were investigated in high density fiberboard (HDF) peripheral up-milling using toughened ceramic cutting tools. The results showed that whether at low speed cutting or high speed cutting, the tangential forces Ft and normal forces Fr increased slowly with the increase of cutting length. The tangential forces Ft...

artificial neural network is one of the most robust and reliable methods in online prediction of nonlinear incidents in machining. tool flank wear as a tool life criterion is an important task which is needed to be predicted during machining processes to establish an online tool life estimation system. in this study, an artificial neural network model was developed to predict the tool wear and ...

Today, numerical simulation can be used as a suitable tool to measure large quantities that are very expensive and, in some cases, impossible to measure. One of the important issues in predicting rock mass boreability in excavation with full face tunnel boring machines is estimating the discchr('39')s forces for rock cutting. For this purpose, the linear cutting test is  employed. However, limi...

crops and agricultural products are subject to natural loading during growth. different mechanical forces are also exerted on them during harvest. one product, sugar cane, experiences large shear forces are during harvest. an examination of the crop properties and machine parameters of sugar cane are necessary to develop appropriate cutting tools and the optimization and design of harvesting ma...

We present a compliant end-effector that helps in cutting soft tissues and sensing the cutting forces. The design of the end-effector is such that it has an upper threshold on cutting forces to facilitate safe handling of tissue during automated cutting. This is shown with nonlinear finite element analysis and experimental results obtained by cutting inhomogeneous phantom tissue. The cutting fo...