نتایج جستجو برای: Cross-corrugated triangular channel
تعداد نتایج: 726258 فیلتر نتایج به سال:
Cross-corrugated triangular channels increase heat transfer in heat exchangers. The mixing effect increases the heat transfer coefficient at the surfaces. In this study, the fluid flow and heat transfer in a triangular corrugated channel are modeled under two constant heat fluxes and different Reynolds numbers. In order to validate, k-ω turbulence model is used. Also, the effect of magnetic fie...
The turbulent convective thermal transfer in channel heat exchangers (CHEs) is studied numerically via the CFD (Computational Fluid Dynamics) method. Deflectors are inserted on hot bottom walls of to enhance hydrothermal characteristics. Various shapes in-line deflectors considered, namely: rectangular (a/b = 0.00), cascaded rectangular-triangular 0.25, 0.50, and 0.75), triangular 1.00) shapes....
In some applications such as morphing technology, high strain and anisotropic behavior are considered a good advantage. The corrugated composite sheets due to their special geometries have a potential of high deflection under axial loading. In this research, to investigate the strain and anisotropic behavior of corrugated composite sheets some glass/epoxy samples with Quasi-sinusoidal, trapezoi...
in this paper, a novel approximate solution to determine the nusselt number for thermally developed, slug (low-prandtl), laminar, single phase flow in channels of arbitrary cross section is presented. using the saint-venant principle in torsion of beams, it is shown that the thermally developed nusselt number for low-prandtl flow is only a function of the geometrical parameters of the channel c...
This paper presents the results of an analytical and experimental study on the characteristics of hydraulic jump in a triangular channel. The analytical consideration is based on the momentum conservation law for the upstream and downstream sections of the jump. The experiments were carried out in a triangular channel of glass side walls with the vertex angle of 94.4°. A wide range of discharge...
abstract one of the most frequently encountered cases of rapid varied flow is the hydraulic jump. it occurs when a supercritical open channel flow changes into sub critical flow. in the present research, the experimental study of the hydraulic jump on seven sinusoidal corrugated beds with different wave steepness. the wave steepness of sinusoidal corrugated beds is in the range of 0.1667 to 0.7...
In the Manning equation the hydraulic radius can be defined as the cross-section dimension of the shape. In pipe flow the bed shear stress is assumed to be uniformly distributed along the wetted perimeter which cannot be true in open channel flow. Hence, three approximation of the true boundary shear-stress distribution are examined and more practical conveyance depth or resistance radius formu...
In this paper, a novel approximate solution to determine the Nusselt number for thermally developed, slug (low-prandtl), laminar, single phase flow in channels of arbitrary cross section is presented. Using the Saint-Venant principle in torsion of beams, it is shown that the thermally developed Nusselt number for low-prandtl flow is only a function of the geometrical parameters of the channel c...
The performance of corrugated baffles inserted in a rectangular channel heat exchanger is investigated. The fluid flows and thermal distribution are determined via numerical simulations. The working fluid has a shear thinning behavior. The influence of the baffle design is explored, we interest to the “wavy” shape. The corrugation angle of baffle (α) is changed from 0° (i.e. a straight...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید