0

The present study provides a correlation and regression analysis of lightweight waste aggregate concretes with varying degrees fibre reinforcement. concrete mix contains pre-soaked red ceramic aggregate, expanded clay coarse Portland cement. Copper-coated crimped steel was used as the experimental results included properties measured by destructive test methods—compressive strength, splitting t...

Research reported in this paper was carried to study the water permeability of steel fibre reinforced concrete (SFRC) with varied aspect ratios of steel fibres. Corrugated steel fibres were used in the investigation at constant fibre content of 0.5%. Relationship of water permeability with compressive strength and split tensile strengths has been presented. The water permeability was observed t...

Submitted: Jul 2, 2013; Accepted: Aug 18, 2013; Published: Aug 29, 2013 Abstract: Experimental Studies were conducted to analyse the influence of crimped polypropylene fibres in cementitious matrix. The compressive strength of concrete with the addition crimped polypropylene fibres for relative volume fractions of 0.1% and 0.3% were evaluated in concrete with water cement ratio as low as 0.3. H...

This paper in essence presents comparative experimental data on the mechanical performance of steel and synthetic fibre-reinforced concrete under compression, tensile split and flexure. URW1050 steel fibre and HPP45 synthetic fibre, both with the same concrete design mix, have been used to make cube specimens for a compression test, cylinders for a tensile split test and beam specimens for a fl...

PURPOSE The purpose of this in vitro study was to determine the effect of crimping and cementation on retention of veneered stainless steel crowns. METHODS One hundred twenty crowns, 90 from 3 commercially available brands of veneered stainless steel crowns (Dura Crown, Kinder Krown, and NuSmile Primary Crown) and 30 (plain) Unitek stainless steel crowns were assessed for retention. An orthod...