Abstract A simple method is proposed to model the open cracked beam structures. In this method, crack is modeled as a beam element. Hence cracked beam can be assumed to be a beam with stepped cross sections, and problem of determining natural frequency and mode shape of cracked beam, can be solved as determining these characteristics for a beam with different length and cross section. With this...

In this paper, the effect of the crack on dynamic behavior of cracked micro-beam in the presence of DC and AC loads are investigated. By applying the residual axial stress and fringing field stress, a nonlinear analytical model of cracked micro-beam is presented and crack is modeled by a massless rotational spring. The governing equation of the system is solved using Galerkin procedure and shoo...

In this study, the natural frequencies and mode shapes of beams without cracks and cracked Timoshenko beams is calculated with different boundary conditions using finite element method. The energy method is used to solve the equations. Hardness and softness matrices for Timoshenko beam without crack are obtained by solving the potential and kinetic energy equations. Then for investigation of cr...

Cracks cause to change dynamic response of beams and make discontinuity in slope of the deflection of the beams. The dynamic analysis of the Euler-Bernoulli cracked beam on the elastic foundation subjected to the concentrated load is presented in this paper. The stiffness of the elastic foundation and elastic supports influence on vibrational characteristics of the cracked beam. The Dynamic Gre...

In this study, a novel and very simple finite element procedure is presented for free vibration and buckling analysis of slim beam-like structures damaged by edge cracks. A cracked region of a beam is modeled using a very short element with reduced second moment of area (I). For computing reduced I in a cracked region, the elementary theory of bending of beams and local flexibility approach are...

In this paper, the transverse vibration of cracked nano-beam has been studied based on modified couple stress theory. Crack is modeled by a rotational spring that creates a discontinuity. Frequency equations of cracked nano-beam with some typical boundary conditions are derived and the frequency parameter for different crack positions, crack parameter and length scale parameters value are calcu...

in this paper, the crack detection and depth ratio estimation method are presented in beamlikestructures using elman networks. for this purpose, by using the frequencies of modes asinput, crack depth ratio of each element was detected as output. performance of the proposedmethod was evaluated by using three numerical scenarios of crack for fixed-simply supportedbeam consisting of a single crack...

A complete investigation on the free vibration and stability analysis of beams made of functionally graded materials (FGMs) containing open edge cracks utilizing four beam theories, Euler-Bernoulli, Rayleigh, shear and Timoshenko, is performed in this research. It is assumed that the material properties vary along the beam thickness exponentially and the cracked beam is modeled as two segments ...

crack identification is a very important issue in mechanical systems, because it is a damage that if develops may cause catastrophic failure. in the first part of this research, modal analysis of a multi-cracked variable cross-section beam is done using finite element method. then, the obtained results are validated usingthe results of experimental modal analysis tests. in the next part, a nove...

This paper presents a new sectional flexibility factor to simulate the reduction of the stiffness of a single-edge open cracked beam. The structural model for crack of the beam is considered as a rotational spring which is related to the ratio of crack depth to the beam height, a/h. The mathematical model of this single-edge open crack beam is considered as an Euler-Bernoulli beam. The modified...