modelling of crack propagation by finite element method under mixed mode conditions is of prime importance in fracture mechanics. this paper describes an application of finite element method to the analysis of mixed mode crack growth in linear elastic fracture mechanics. crack growth process is simulated by an incremental crack-extension analysis based on the maximum principal stress criterion,...

In this thesis an investigation and modelling of the fatigue crack propagation in the nickel based superalloy Inconel 718, with a special emphasis on the effect of hold times, is presented. The modelling work has been concentrated on describing the hold time fatigue crack propagation by using the concept of a damaged zone in front of the crack tip, which is believed to have a lowered resistance...

Considering the fact that rocks fail faster under tensile stress, rock tensile strength is of greatimportance in applications such as blasting, rock fragmentation, slope stability, hydraulic fracturing,caprock integrity, and geothermal energy extraction. There are two direct and indirect methods tomeasure tensile strength. Since direct methods always encompass difficulties in test setup, indire...

considering the fact that rocks fail faster under tensile stress, rock tensile strength is of greatimportance in applications such as blasting, rock fragmentation, slope stability, hydraulic fracturing,caprock integrity, and geothermal energy extraction. there are two direct and indirect methods tomeasure tensile strength. since direct methods always encompass difficulties in test setup, indire...

Finite element method (FEM) is one of the most famous methods which has many applications in varies studies such as the study of crack propagation in engineering structures. However, unless extremely fine meshes are employed, problem arises in accurately modelling the singular stress field in the singular element area around the crack tip. In the present study, the crack growth simulation has b...

A combined finite/ discrete element method is presented for modelling of composite specimens subjected to dynamic/impact loadings. The main task is set on developing an algorithm for simulation of potential bonding and debonding/delamination phenomena during impact or general dynamic loading conditions. In addition, full fracture analysis can also be performed. The proposed approach adopts a ge...

An extended nite element method (X-FEM) for three-dimensional crack modelling is described. A discontinuous function and the two-dimensional asymptotic crack-tip displacement elds are added to the nite element approximation to account for the crack using the notion of partition of unity. This enables the domain to be modelled by nite elements with no explicit meshing of the crack surfaces. Comp...

In this paper an analytical crack propagation scenario is proposed which assumes that a crack propagates in the tooth root in both the crack depth direction and the tooth width direction, and which is more reasonable and realistic for non-uniform load distribution cases than the other presented scenarios. An analytical approach is used for quantifying the loss of time-varying gear mesh stiffnes...

Continuum approaches to fracture regard crack initiation and growth as the ultimate consequences of a gradual, local loss of material integrity. The material models which are traditionally used to describe the degradation process, however, may predict premature crack initiation and instantaneous, perfectly brittle crack growth. This nonphysical response is caused by localisation instabilities d...

Infra-red video sequences were taken of directly bonded silicon wafer pairs undergoing the razor blade crack length test for bond strength in a specially designed jig. A series of tests were carried out under controlled atmospheres of nitrogen at various relative humidities. Analysis of the video images showed that the crack continues to propagate rapidly for several minutes after the blade has...