The mixed potential response for NO and NO2 from two different oxide electrodes on yttria-stabilized zirconia (YSZ) was examined at 500 jC. The two electrodes were La0.6Sr0.4Fe0.8Co0.2O3 (LSFCO) and Cr2O3. Sensors made with LSFCO electrodes had consistently lower sensitivity towards NOx as compared to those with Cr2O3 and the focus of this paper is to understand the fundamental reasons for the ...

The plasma spray process was used to form 70%NiCrAlY + 30%TiO2 and 25%Cr2O3 5%YSZ cermet coatings on MDN-420 special steel alloy . Cyclic oxidation testing conducted coated uncoated specimens at 700°C under a static air environment. Thermogravimetric analysis applied establish the kinetics. X-ray diffraction (XRD), scanning electron microscopy (SEM)/energy-dispersive x-ray spectroscopy (EDS), p...

Stainless steels in atmospheres containing H2O form a Cr2O3 scale in the early stage of oxidation. However, the Cr2O3 scale gradually degrades with time. In order to determine the effect of H2O on the deterioration of a Cr2O3 scale, evaporation behavior of Cr2O3 in N2-O2-H2O atmospheres was investigated. The rate of mass loss in a N2-O2-H2O atmosphere was found to be one order of magnitude high...

Hip implants containing cobalt-chromium (CoCr) have been used for over 80 years. In patients with metal-on-metal (MoM) hip implants, it has been suggested that wear debris particles may contribute to metal sensitization in some individuals, leading to adverse reactions. This article presents data from a study in which the popliteal lymph node assay (PLNA) was used to assess immune responses in ...

This study investigates the resistance switching characteristics of Cr2O3-based resistance random access memory (RRAM) with Pt/Cr2O3/TiN and Pt/Cr2O3/Pt structures. Only devices with Pt/Cr2O3/TiN structure exhibit bipolar switching behavior after the forming process because TiN was able to work as an effective oxygen reservoir but Pt was not. Oxygen migration between Cr2O3 and TiN was observed ...

We have investigated the fabrication of α-Cr2O3(0001) thin film on a Au(111) surface and the effect of the antiferromagnetic feature of α-Cr2O3(0001) on the magnetic properties of ultrathin Co film on α-Cr2O3(0001). Highly oriented α-Cr2O3(0001) thin film is fabricated by oxidizing Cr(110) thin film grown on a Au(111) surface. Upon the oxidization of threefold symmetric Cr(110) thin film, the α...

We demonstrate boundary spin polarization at the surface of a Cr2O3 single crystal using spin-polarized low-energy electron microscopy (SPLEEM), complementing prior spin polarized photoemission, spin polarized inverse photoemission, and x-ray magnetic circular dichroism photoemission electron microscopy measurements. This work shows that placing a Cr2O3 single crystal into a single domain state...

Colossal ionic conductivity was recently discovered in YSZ/SrTiO3 multilayers and was explained in terms of strainand interface-enhanced disorder of the O sublattice. In the present paper we use a combination of scanning transmission electron microscopy and electron energy loss spectroscopy (EELS) and theoretical EELS simulations to confirm the presence of a disordered YSZ O sublattice in coher...

In this study, the effects of calcination and milling of 8YSZ (8 mol% yttria stabilized zirconia) used in the nickel-YSZ anode on the performance of anode supported tubular fuel cells were investigated. For this purpose, two different types of cells were prepared based on a Ni-YSZ/YSZ/Nd2NiO4+δ-YSZ configuration. For the anode preparation, a suspension was prepared by mixing NiO and YSZ in a ra...