In this work, a non-isolated high step up DC-DC converter using coupled inductor and voltage multiplier cell is proposed. The proposed converter conversion ratio is efficiently extended by using a coupled inductor. An interleaved configuration of two diode-capacitor cells is applied to step up the voltage conversion ratio and decrease the voltage stress across the switches. Also, in the suggest...

In this paper an efficient high step-up converter with a coupled- inductor with soft- switching operation is presented. The proposed topology includes a coupled-inductor boost converter for raising the voltage gain. Moreover, a simple auxiliary resonant circuit composed of an auxiliary switch, a clamping diode and a resonant tank (inductor, capacitor), is adopted in this paper. The coupled-indu...

The main objective of this paper, a bidirectional dc–dc converter with duel coupled inductor is proposed. In the boost mode, two capacitors are parallel charged and series discharged by the coupled inductor. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. The voltage stress on the main switch is reduced by a passive clamp circuit. Therefore, the low resistance RD...

This paper presents an analysis of coupled inductor for interleaved boost converter and the effect of coupled inductor on current ripple reduction and on load transient response time. From the analysis a ETD core based coupled inductor structure is proposed to maximize the performance of the DC-DC converter. The inductor can be designed in convenient way by using commercially manufactured coil ...

Abstract—In this paper, a high-conversion-ratio bidirectional dc–dc converter with coupled inductor is proposed. In the boost mode, two capacitors are parallel charged and series discharged by the coupled inductor. Thus, high step-up voltage gain can be achieved with an appropriate duty ratio. The voltage stress on the main switch is reduced by a passive clamp circuit. Therefore, the low resist...

The paper presents a unified steady-state analysis of PWM SEPIC converter with coupled inductors and separate inductors for both continuous and discontinuous conduction modes. The results of this simplified analysis allow to determine the operating point of converters and further the small-signal low-frequency parameters of linear model, and to design the converter too. The expressions of all s...

The generalised steady-state analysis of the multi-phase interleaved boost converter with coupled inductors operated in continuous inductor current mode is addressed. The analytical expressions for efficiency, inductor and input currents, and output voltage are derived from the transformed average state–space model. Generalised expressions for the input and inductor current ripples and the outp...

Efficient wireless energy transfer between two inductor-capacitor circuits has been demonstrated by applying the principles of Coupled Mode Theory to create a system of strongly-coupled, resonating magnetic fields. This paper makes a detailed analyzes how Coupled Mode Theory is used to increase energy transfer between two simple inductor-capacitor circuits.

Four-turn coupled (flux-closed) inductor structures have been fabricated and tested for use in high-power-density integrated voltage regulator (IVR) applications. Our solenoid-like structure is comprised of a laminated magnetic core of four rungs surrounded by four Cu windings creating four coupled inductors. The magnetic core is made of laminations of ultra-high-vacuum-sputtered [5 nm Ta/200 n...

A differentially excited symmetric inductor that enhances inductor quality ( ) factor on silicon RF ICs is presented. Compared with an equivalent single-ended configuration, experimental data demonstrate that the differential inductor offers a 50% greater factor and a broader range of operating frequencies. Predictions from full-wave simulations and a physics-based SPICE-compatible model are va...