An axially corrugated horn antenna with an elliptically shaped taper is proposed for satellite communication applications. This structure is a good candidate for the feed of reflectors and also for improving the electrical properties of reflector antennas. A tapering method is used to justify the horizontal location of the corrugation profile which improves the electrical performance of the pre...

recently a new structure called groove gap waveguide (GGW) is ‎introduced to implement low loss microwave component devices ‎especially for millimeter wave applications. This paper presents a ‎new type of H-plane horn antenna making use of this new technology ‎in which backward radiation is significantly suppressed by ‎introducing a high impedance surface at the antenna aperture. The ‎high impe...

Few-moded or over-moded horns are now being proposed for far-IR space receiver systems, e.g. the High Frequency Instrument (HFI) on the ESA PLANCK Surveyor. In such systems individual waveguide modes can couple independently to an overmoded detector (such as a bolometer in an integrating cavity). We consider in detail the case of a cylindrically symmetric configuration consisting of a corrugate...

Cassegrain Reflector Antenna Design consists of various effects caused by blockage and its effect on overall performance. The design for minimum blockage condition results in geometry that offers lower amount of blockage and increased spillover past the subreflector. To avoid this, optimized design of the antenna results in geometry that offers lower amount of spillover past the edges of the ma...

Conclusion: It is possible to produce a very simple dual feed horn by cutting off a part of one side of a corrugated horn and fitting two of them together. A common ridge between both horns and, at least, one complete slot in each horn part is necessary to decouple them suficiently. The horn can be used for orthogonal polarisations with good cross-polar performance over a frequency band of abou...

in this paper a new low profile substrate integrated waveguide (siw) probe-fed h-plane horn antenna structure with improved gain is proposed. the proposed antenna consists of two waveguides including a rectangular and a taper one, in which both, first and third modes of the structure are simultaneously excited leading to a uniform field distribution along the radiating aperture of the antenna a...

Corrugated waveguide transmission lines are in use to transmit high power mm-wave radiation from gyrotrons to the plasma for electron cyclotron plasma heating in tokamaks such as ITER. The coupling efficiency of the gyrotron output radiation formed as a quasi-Gaussian beam to the waveguide mode is a critical issue. A hyperbolic corrugated horn serves as a converter of the TEM00 Gaussian mode to...