aisi 304l austenitic stainless steel with different grain sizes of 0.5 -12 μm was obtained through the martensiticprocess. corrosion behavior of different samples was investigated in a 0.5m hcl solution using open circuitpotential, potentiodynamic polarization and electrochemical impedance spectroscopy tests. also, the correlationbetween the grain size and pitting corrosion resistance was asses...

in this study, the effects of forming method (extrusion) and environmental factors (solution ph and temperature) on the corrosion performance of az91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (eis), scanning electron microscopy (sem) and salt spray techniques. the polarization test results of the specimens showed that simple sh...

Copper-bearing intrauterine devices(Cu-IUDs) are being increasingly used all over the world. However, the dissolution of copper in the presence of proteins is not well characterized. Here, with open circuit potential, electrochemical impedance spectroscopy measurements and potentiodynamic polarization test, the corrosion behavior of copper samples in different single-protein simulated uterine s...

vanillin is an interesting corrosion inhibitor because of its safe use and high solubility inwater. the effect of vanillin on the corrosion inhibition of carbon steel in 1.0 mhydrochloric acid solution has been studied using potentiodynamic polarization,electrochemical impedance spectroscopy (eis) and electrochemical noise (en) techniques.the effect of temperature on the rate of corrosion in th...

The carbon dioxide corrosion electrochemistry of mild steel has been studied in the presence of high CO2 partial pressures and acetic acid (HAc). Potentiodynamic sweeps, linear polarization resistance (LPR) and weight loss (WL) experiments have been conducted to investigate the effects of flow velocity, CO2 partial pressure, and acetic acid concentration on the corrosion rate of mild steel. Ele...

Corrosion inhibition of mild steel in 1 M HCl and 0.5 M H2SO4 by dapsone were studied by polarization resistance, Tafel polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurement. Results obtained revealed that inhibition occurs through adsorption of the drug on metal surface without modifying the mechanism of corrosion process. Potentiodynamic polarization suggested...

The inhibiting effect of drugs towards the corrosion of different metals and alloys has been reviewed in this paper. Results of Weight loss method, Potentiodynamic polarization and Electrochemical impedance spectroscopy were investigated. Kinetic and thermodynamic parameters provide valuable information about the mechanism of corrosion inhibition. Different classes of drugs, having hetero-atoms...

as an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. corrosion resistance was studied in 3.5 wt.% nacl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...

This paper focused on the characterization of electrochemical behavior of a martensitic stainless steel in the acidic solutions. For this purpose, electrochemical parameters were derived from potentiodynamic polarization, Mott Schottky analysis and electrochemical impedance spectroscopy (EIS) techniques. The potentiodynamic polarization results showed that corrosion current density of AISI 420 ...

in this study, the four cr-mn-(ni-free) austenitic steels were fabricated by vacuum induction furnace. then plates with 10 mm thickness were fabricated by hot-rolling. corrosion behaviour of the four cr-mn steels in 0.1 m h2so4 solution was investigated using by open-circuit potential, potentiodynamic polarization, and electrochemical impedance spectroscopy (eis). the results indicated that the...