The fracture mechanics examines the development and expansion of cracks in solids and how they affect the deformation of materials. The stress intensity factors at the tip of the crack and the critical stress intensity factors or fracture toughness of materials are considered in the relevant criteria. There are three main modes of applying forces to a crack including the tensile mode, shear mod...

the electrical resistivity of hydrocarbon reservoir rocks is an important parameters in the calculation of water and oil saturation percent in both carbonate and sandstone reservoir rocks.in this regard, most studies have concentrated on the confining  pressure on cementation factor and electrical resistivity in sandstone reservoir rocks. in this study the effect of confining pressure on cement...

In some natural events such as soil failure the deformations are localized in narrow restrictions, which are called shear bands. This event which is a fundamental phenomenon in granular material, has been widely investigated during recent decades within expensive experimental tests and also some numerical simulations. Most of previously used numerical methods are based on continuum theories des...

In recent years, various studies have been undertaken on how to use waste materials in civil engineering projects. Among waste materials, waste rubber has been highlighted to be used for different purposes such as reinforcing of soil and making of reinforced slopes. To investigate the properties of granulated rubber-soil mixture and its application in making of slopes behind retaining walls, so...

In this study, the effect of confining pressure on the crack growth behavior in a highly filled elastomer was investigated. The material under investigation contains 86% by weight of hard particles embedded in a rubbery matrix. The specimens were tested at a constant strain rate under a confining pressure. Two confining pressures, 3.45 MPa and 6.9 MPa, and two types of loading, monotonically in...

— The shearing strength and volumetric relationship of granular materials change notably with a variation of confining pressure. In this study the effect confining pressure on the mechanical behavior of granular materials were observed using discrete element method (DEM). The triaxial tests were conducted on seven specimens covering a range from extremely low to high confining pressures. Each i...

Materials such as waste tire chips were widely used to improve the strength of soil. The objective of this study is to discuss the residual strength or steady-state behavior of sand-waste tire chip mixtures. A series of undrained monotonic triaxial compression tests were conducted on reconstituted saturated specimens of sand and sand-tire chip mixtures with variation in the tire-chip contents f...

In dusty plasma experiments, the confining potential of the GEC rf Reference Cell is commonly assumed to be parabolic. There are various ways to test this assumption, many of which interfere with the plasma. We use the noninvasive method of perturbing a single particle suspended in the plasma with laser pulses. In this experiment a cw laser (532nm, 0.01.05W) supplied the radiation pressure forc...

in this study, a researching program is conducted by cyclic triaxial test to determine the post-cyclic behavior of bushehr carbonate sand retrieved from the north of the persian gulf, under anisotropic consolidation at 200 kpa confining pressure. the article compares the post-cyclic monotonic strength and excess pore water pressures generated after the test with the pre-cyclic monotonic results...