In this study, the stress distribution in the shrinkage process when a light-cured composite resin is irradiated with light was estimated. We assumed that shrinkage and hardening of the light-cured composite resin resulted from light irradiation and was the same as that caused thermally. On the basis of this assumption, we simulated the deformation during the shrinkage of the composite resin us...

OBJECTIVES To determine the static load-bearing capacity of direct composite onlay restorations made of novel filling composite resin system which combines short fiber-reinforced composite resin (FC) and conventional particulate filler composite resin (PFC). METHODS Three groups of onlay restorations were fabricated (n = 8/group); Group A: made from conventional particulate filler composite r...

The flexural strength and flexural modulus of an experimental metal-resin composite, which used Ag-In alloy particle as the filler, were evaluated. The effect of acid treatment and heat treatment on the Ag-In alloy particle was investigated. The flexural strength of the experimental metal-resin composites ranged from 65.5 MPa to 91.0 MPa. The flexural strength of the metal-resin composite incre...

Resin Composites Sandwich restorations and Curing techniques Anders Lindberg, Department of Dental Hygienist Education, Faculty of Medicine, Umeå University, 901 87 Umeå, Sweden. Since the mid-1990s resin composite has been used for Class II restorations in stress-bearing areas as an alternative to amalgam. Reasons for this were the patients’ fear of mercury in dental amalgam and a growing dema...

Background. The aim of this study was to investigate the effect of preheating methacrylate- and silorane-based composite resins on their color stability up to 40 times at 55‒60°C. Methods. Seventy-six methacrylate and silorane-based composite resin samples, with a diameter of 10 mm and a height of 2 mm, were divided into 4 groups (n=19). After the samples were prepared, their color parameters w...

OBJECTIVE The purpose of this study was to analyze the shear bond strength of a new composite resin to polymer-based composite substrates using various surface roughnesses and two kinds of polymer matrices. MATERIALS AND METHODS Particulate filler composite resin with cross-linked polymer matrix and fiber-reinforced composite with semi-interpenetrating polymer matrix were used as bonding subs...

The purpose of the present study was to evaluate how ultraviolet light (UV) irradiation using an ordinary UV sterilizer would affect the bonding of experimental composite resins to an autopolymerizing acrylic resin. To this end, three composite resins and one unfilled resin--of which the compositions were similar to commercial composite resin artificial teeth--were prepared as repair composites...

The newly introduced self-adhering flowable resin-composites Background: decrease the required time for application by incorporation of an acidic adhesive monomer, thus reducing the number of steps, but its bonding is still uncertain. The aim of this study was to evaluate the interfacial microscopic examination and chemical analysis at the resin-dentin interface of a self-adhering flowable resi...

T he superior physical properties of composite resins have aroused the possibility of their use beyond the accepted indications for acrylic resin and silicate cement. The literature has suggested the use of composite resin for Class I,‘m4 Class II,” and Class IV39 * restorations. Other reports advocated the use of composite resin or tested the influence of pins on the physical properties of com...

Background: The newly introduced self-adhering flowable resin-composites decrease the required time for application by incorporation of an acidic adhesive monomer, thus reducing the number of steps, but its bonding is still uncertain. The aim of this study was to evaluate the interfacial microscopic examination and chemical analysis at the resin-dentin interface of a self-adhering flowable resi...