The composite structural system (RCS) is a new type of moment frame, which is including a combination of concrete columns (RC) and steel beams (S). These structural systems have the advantages of both concrete and steel frames [1]. In previous research on composite structures, there are some studies regarding RCS composite conections, but there is no investigation about seismic resisting system...

Cross-bracing (X-bracing) is one of the most popular methods of seismic retrofitting, and has been shown to significantly increase the structural stiffness and strength of buildings. Conventional steel X-bracing methods typically exhibit brittle failure at the connection between the brace and the building, or buckling failure of the braces. This study investigated the structural properties of a...

One application, only in-situ soil mixing (or deep mixing method, DMM) is becoming increasingly common as an economical construction method for temporary support of deep foundation excavations and is also used in the construction of permanent retaining walls. Steel beams placed into the fresh soil/cement are generally used as the primary structural support, later supplemented with bracing or ti...

This study proposes a new tension member with buckling-free function using carbon fiber reinforced polymer for the seismic bracing system. Firstly, concept of composite brace; partially fibred brace, is introduced. Secondly, material strength brace molded by modified pultrusion investigated. Finally, cyclic loading tests to simulate are conducted. As result, it was demonstrated that system can ...

The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...

In this paper the results of an experimental program were presented to show effect cross bracing on behavior composite bridges. Two types models prepared in laboratories American University Cairo Egypt. These chosen be one tenth scale model Federal Highway Administration (FHWA). Deflections and strains measured for each according set comparisons made bracing.

This paper investigates the applicabilty of an innovative bracing, called Articulated Quadrilateral (AQ) bracing system, which uses shape memory alloys (SMAs), for retroffiting low-rise to high-rise vulnerable SMFRs against strong ground motions. The paper investigates brace fundamental engineering characteristics, design of the system and also configuration of the brace (the proportion of SMA ...

Abstract:   Previous research on bracing members show that the ductility of bracing members is compromised due to the buckling phenomena. Therefore, many researchers have tried to use special considerations to increase the fracture life of bracing members. Some of these recommendations such as increasing the slenderness ratio, using lower width to thickness ratio, increasing the out-of-p...

Steel bracing members are widely used in steel structures to reduce lateral displacement and dissipate energy during earthquake motions. Concentric steel bracing provide an excellent approach for strengthening and stiffening steel buildings. Using these braces the designer can hardly adjust the stiffness together with ductility as needed because of buckling of braces in compression. In this stu...