Kinetic models are the most important tools for the prediction and evaluation of the flotation circuits performance. In order to determine the kinetic order and rate of flotation of a Gilsonite sample, flotation experiments were conducted using the combination of Gasoline-Pine Oil, and one test without any collector and frother. The pulp density was 10% and the experiments were carried out in b...

In this work, the effects of the types of frother (MIBC, pine oil, and A65) and operational parameters (impeller speed and air flow rate) on the flotation of quartz coarse particles was investigated using nano bubbles (NBs). Quartz particles of the size of -425+106 mm and three types of frother were used for the flotation experiments. Also the impeller speed was 600 to 1300 rpm, and the air flo...

Partition curves are widely used to determine the spiral separator efficiency. In this work, the partition curves were used in order to investigate the particle transportation to concentrate and tailing streams. Simulation of fine particle removal using the size-by-size partition curves showed that the recovery of gangue particles to concentrate can decrease 8.7%. It also showed that the recove...

separation method that is widely used in coal beneficiation for the separation of fine coal particles from associated minerals in water slurries. Since the cumulative recovery of a component in the concentrate is proportional to flotation time, the flotation process can be considered as a time-rate recovery process (Emad, Mohammad, and Bahram, 2010). Therefore, the general mathematical flotatio...

This research was aimed at evaluating the efficiency of advanced gravity and magnetic separations on the recovery of chromite from the fine Platinum Group Metals (PGM) tailings consisting of particles 80% passing 75 µm with about 45% being >45 µm resulting in high chromite losses. The PGM plant tailings were subjected to X-ray fluorescence, scanning electron microscopy and particle size dis...

In this study, hydrophobic talc nanoparticles were applied as a novel class of solid flotation collector. The aim of this work was to understand the effect of talc nanoparticles size and dosage on the quartz flotation recovery. X-ray analysis, dynamic light scattering, and scanning electron microscopy were conducted. Flotation tests were performed in modified a Hallimond flotation cell. The Zet...