fischer-tropsch synthesis is a promising route for production of light olefins via co hydrogenation over transition metals. co is one of the most active metals for fischer-tropsch synthesis. some different variables such as preparation parameters and operational factors can strongly affect the selectivity of fischer-tropsch synthesis toward the special products. in the case of preparation varia...

methanol steam reforming plays a pivotal role to produce hydrogen for fuel cell systems in a low temperature range. to accomplish higher methanol conversion and lower co production, the reaction was catalyzed by cuznfe mixed oxides. various ratios of fe and cu/zn were coprecipitated in differential method to optimize the cuznfe structure. the sample containing 45cu50zn5fe (wt. %) revealed its m...

nanostructured iron oxide powder that has been recovered from waste pickling liquor unit of steel industry was studied for oxidation catalytic applications. in this research, the powder was characterized by x-ray diffraction (xrd) and transition electron microscopy (tem) for determination of phase structure, morphology and particle size. furthermore, the specific surface area of the powder was ...

using fe(no3)3.9h2o, co(no3)2.6h2o and mn(no3)2.4h2o the magnetic properties of nanoparticles trimetalic iron - cobalt - manganese, with supported magnesium oxide have been prepared by co-precipitation and solvothermal methods. the prepared samples are characterized by scanning electron microscope (sem), x-ray diffraction (xrd), vibrating sample magnetometer (vsm) and brunaer-emmett-teller (bet...

monometallic and bimetallic ni and co catalytic nanoparticles supported on titanium dioxide (rutile phase) substrate were prepared by wet impregnation method. these nanoparicles were used as catalysts for synthesis of multiwalled carbon nanotubes (mwcnts) from acetylene decomposition at 700°c by the catalytic chemical vapor deposition (ccvd) technique. the nanomaterials (catalyst and cnts) were...

The SiO2 supported cobalt-iron nano catalysts were prepared by the sol-gel method. This research investigated the effects of (Co/Fe) wt.%, different Co/Fe ratio at different temperature and loading of KCl wt.% for Fisher-Tropsch synthesis (FTS). The results were showed that the catalyst containing 50 wt.% (Co/Fe)/SiO2 (Co/Fe ratio is 70/30) which promoted with 0.6 wt.% KCl is an optimal nano ca...

in this research we used heavy propylene tetramer (hpt) and a1c13 —bf3 (lewis acids) ascatalyst and ethanol, n-propanol and n-butanol as co-catalyst. using lewis acids as catalyst, thehpts form molecules with higher molecular weight. since the raw materials of the reaction are byproducts of other reactions, are not pure and contain various compounds with different m.w andalso different chemical...

vanadium phosphorus oxides (vpo) has been applied as a heterogeneous catalyst in gas phase oxidation reactions and its application is very limited in liquid phase. in this study a series of cobalt-doped vanadium phosphorus oxides (vpo-co) catalysts with different loading of co (0.01-1.0 mol ratio of co/v) were prepared. oxidation of benzyl alcohol was studied in the liquid phase over vpo and vp...

a series of x(co, mn)/tio2 catalysts (x=2–12wt.%) containing 25%co and 75%mn were prepared by the co-impregnation method. all prepared catalysts have been tested in fischer-tropsch synthesis for production of c2-c4 olefins. it was found that the catalyst containing 8wt.%(co,mn)/tio2 is an optimal catalyst for production of c2-c4 olefins. the effect of operation conditions such as the h2/co mola...

Nano-structure of Co–Mn spinel oxide was prepared by thermal decomposition method using [Co(NH3)4CO3]MnO4 as the precursor. The properties of the synthesized material were characterized by X-Ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), Transmission Electron Microscopy (TEM), surface area measurements, Energy-Dispersive X-ray (EDX) spectroscopy analys...