the fabrication of complex-shaped parts out of (wt %) co-28cr-6mo alloy by three-dimensional printing (3dp) was studied using two grades of the alloy with average particle sizes of 20 and 75 μm. to produce sound specimens, 3dp processing parameters were tuned. the sintering behavior of the powders was characterized by the dilatometric analysis. batch sintering in argon atmosphere at 1280 °c for...

background: dental cobalt base alloys are biocompatible dental materials and have been widely used in dentistry. however, metals are bioinert and may not present bioactivity in human body. bioactivity is the especial ability to interact with human body and make a bonding to soft and hard tissues. the aim of the present research was fabrication and bioactivity evaluation of novel cobalt alloy/ f...

Dental alloys for direct metal laser sintering (DMLS) are available on the market today, but there is little scientific evidence reported on their characteristics. One of them is the release of ions, as an indicator of the corrosion characteristics of a dental alloy. Within this research, the difference in the elution of metals from DMLS and cast (CM) samples of Co-Cr-Mo dental alloy in saliva-...

UNLABELLED Cell culture system has been used to evaluate alloy cytotoxicity under different environments, testing the extracts, but the effect of temperature variation on the cytotoxicity of dental alloys has not been analyzed. OBJECTIVE The aim of the present study was to investigate if temperature variation could affect dental alloy cytotoxicity, testing alloy extracts in an epithelial cell...

The work presents the results of the studies of Co-Cr-Mo casting alloys used in the production of frame casts of removable dentures, crowns and bridges in dental prosthetics. The studies were performed on four Co-Cr-Mo alloys of different contents of Mo, W and other additives. Electrochemical tests were performed, which aimed at examining the corrosion resistance of the alloys and observing the...

The presented paper studies the effect of the casting technology on the corrosion resistance of Co-Cr-Mo alloy. The investigations were conducted on a commercial alloy with the brand name ARGELOY N.P SPECIAL (Co-Cr-Mo) produced by Argen as well as the same alloy melted and cast by the lost wax casting method performed by a dental technician. The corrosion behavior of the dental alloys in an art...

The aim of this study was to determine the effect of the oral environment on the corrosion of dental alloys with different compositions, using electrochemical methods. The corrosion rates were obtained from the current-potential curves and electrochemical impedance spectroscopy (EIS). The effect of artificial saliva on the corrosion of dental alloys was dependent on alloy composition. Dissoluti...

The purpose of this study was to compare the castability of Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) and Co-Cr-Mo (Vera PDI) alloys invested with either conventional (phosphate- and silica-based) or mixed investing techniques. A 10 X 10 mm square-shaped nylon net containing 100 open squares served as a template for construction of wax patterns, which were invested with phosphate-based inves...

An improvement in the mechanical properties of a biomedical Ni-free Co-Cr-Mo alloy under as-cast condition has been examined by means of tensile tests and microstructure observations. The solubility of N in Co-Cr-Mo alloys increases with increasing Cr content from 29 to 34mass%. This results in a significant improvement in mechanical properties such as yield stress, tensile strength, and fractu...