Circular simple shear extrusion process was introduced as a new geometry for simple shear extrusion technique to fabricate ultrafine-grained materials. Similar to the simple shear extrusion method, this process is also based on direct extrusion, and the samples deform in a simple shear manner. In this investigation, the simulations were carried out using the commercial finite element code ABAQU...

in this study, the effects of forming method (extrusion) and environmental factors (solution ph and temperature) on the corrosion performance of az91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (eis), scanning electron microscopy (sem) and salt spray techniques. the polarization test results of the specimens showed that simple sh...

Abstract The review considers the possibilities of new methods solid-state extrusion polymers based on use deformation schemes that include simple shear - equal-channel angular extrusion, multi-angle and combined extrusion. Information evolution physico-mechanical properties glassy, semi-crystalline polymers, polymer blends composites is given.

The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained a...

[1] The Rand and Sierra de Salinas schists of southern California were underplated beneath the southern Sierra Nevada batholith and adjacent Mojave‐Salinia region along a shallow segment of the subducting Farallon plate in Late Cretaceous time. Various mechanisms, including return flow, isostatically driven uplift, upper plate normal faulting, erosion, or some combination thereof, have been pro...

The objective of this paper is to investigate the viscous shear heating effect on the formation of minimum film thickness in inlet zone of the hydrostatic extrusion process as function of various operating parameters. Minimum film thicknesses in the inlet zone has been evaluated at various extrusion speeds, material parameters, extrusion pressures, and die semiangle for extrusion of low strengt...

In this study, the effects of forming method (extrusion) and environmental factors (solution pH and temperature) on the corrosion performance of AZ91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and salt spray techniques. The polarization test results of the specimens showed that simple sh...