نتایج جستجو برای: Chloride Threshold Values
تعداد نتایج: 693589 فیلتر نتایج به سال:
BACKGROUND Although the Netherlands currently has its own procedure for evaluating chemical compounds and setting occupational exposure limits (OELs), most of these limits were originally adopted in the 1970s from threshold limit values (TLVs) set by the American Conference of Governmental Industrial Hygienists (ACGIH). However, beginning in the late 1980s, criticism about non-scientific consid...
This article is a critical review of some of the methods that have been used for the sampling, analysis, and monitoring of vapor-phase toluene diisocyanate (TDI). Only some of the methods that have received relatively widespread application have been addressed in this article. This review includes a "tutorial style" discussion of basic definitions and basic principles and procedures of quality ...
Assessment of exposure to airborne endotoxins has been studied for several years, especially in occupational environments, but a large number of procedures are used for sampling and analysis. This lack of standardization makes it very difficult to compare results and set internationally accepted threshold limit values (TLVs) or occupational exposure limits (OELs) for endotoxin exposure. This pa...
in this research, air sampling of workplaces was carried out by two methods (long - time and short - time). the mean formaldehyde concentration with long - time method in pathology labs, surgery and endoscopy sections were 0.96 0.25 and 0.13 ppm and with short - time method, 8 hours, was 3, 0.3 and 0.2 ppm. the mean formaldehyde concentration in pathology labs was above the standard values (tlv...
BACKGROUND The RD(50) (exposure concentration producing a 50% respiratory rate decrease) test evaluates airborne chemicals for sensory irritation and has become an American Society for Testing and Materials (ASTM) standard method. Past studies reported good correlations (R(2)) between RD(50)s and the occupational exposure limits, particularly threshold limit values (TLVs). OBJECTIVE The main ...
0
Threshold limit values (TLVs) are intended to protect workers from the severest effects of thermal stress and to establish the exposures to heat in working conditions. Earlier, acute heat strokes often occurred as a result of working in hot environments in Japan. However, acute heat strokes recently sometimes occurred in outdoor work environments such as industrial constructions and agriculture...
The body of information in this paper is directed to specialists in industrial health and safety, and air and water pollution, who need quantitative data on the odor thresholds of potentially hazardous chemical vapors and gases. The literature, largely unorganized, has been reviewed for 214 compounds and condensed into tables based on consistent units. Data on the volatility, solubility, ioniza...
Copper effects on human health represent a relevant issue in modern nutrition. One of the difficulties in assessing the early, acute effects of copper ingested via drinking water is that the taste of copper may influence the response and the capacity to taste copper in different waters is unknown. The purpose of the study was to determine the taste threshold of copper in different types of wate...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید